The terracotta pots are buried in the soil, and filled with water. That water then slowly seeps into the soil while being protected from surface evaporation. They may save between 60 – 70% of water when compared to the conventional watering can. 1

They are thought to have been used by humans for over 4000 years, and have seen use around the world. 2

“To maximize impact, place ollas every 2 – 3 feet in the garden. Larger ollas, with a 2 or more-gallon capacity, can be placed up to 3 – 4 feet apart.“ [1]

Today, there are many different options: including watering spikes, traditional style olla, and irrigation-ready olla.

Make Your Own:

If you can not afford or find a traditional Olla, you can create your own.

Supplies:

• Two plain terracotta pots
• Terracotta pot saucer/base
• Silicone glue or another sealant of your choice
• A flat rock or pot saucer

Instructions:

1. Fill the drainage hole of one of the pots with the silicone glue. Allow it to fully set.
2. Use the glue to seal top rims of the two pots together. Allow the glue to fully set.
3. Dig a hole in your garden deep enough for the top edge of the pot to be just above the soil.
4. Place in the pot so that the unfilled drainage hole is to the top. Fill in the dirt, leaving the top uncovered.
5. Fill the pot with water. This is much easier with a funnel (if you have one).
6. Place the rock or pot saucer over the hole to keep anything from falling in.

#gardening #FarmingAndGardening #farming #water #ollas #olla