Location:

Where your plant grows is the first thing to consider, because the environment will dictate the adaptations it needs to survive. For example, many evergreens produce antifreeze compounds before winter to protect their leaves. Since they don’t drop their leaves, they can photosynthesize even in the colder months. In contrast, cacti thrive in deserts because of their shallow root systems (which absorb rain quickly), waxy coatings to prevent moisture loss, water-storing cells, and the ability to go dormant during harsh conditions.

Once you decide on a location, ask yourself what adaptations your plant might need to survive there. You don’t have to get too technical (no need to become a biologist), but a little thought will help ensure your plants feel like a natural fit for the landscape. For instance, if a character encounters a carnivorous pitcher plant in a winter wasteland, readers might wonder how it survives the cold, why its liquid doesn’t freeze, and what it’s trying to catch in such an environment. Unless you have answers for these, it may seem out of place.

Reproduction:

How your plant reproduces affects its appearance. Do you want flowers? Fruit?

Pollination:

> UV light coloration (left) VS light coloration.

• Taste: Some flowers detect the vibrations from a bee’s wings and respond by adding more sugar to their nectar, increasing their appeal.
• Scent: Most flowers emit scents to attract pollinators, but one takes this to the extreme: the corpse flower. It smells like decaying flesh, tricking carrion beetles and flies into helping it pollinate.
• Appearance: Pollinators see flowers differently than we do. For example, we can’t see UV light, but many pollinators can, and that coloration can look like lights directing pollinators where the flowers need them.

Other plants use wind for pollination, like pine trees, which release pollen into the air.

No Pollination:

Some plants reproduce asexually, like ginger(you can grow a new plant from a cutting of its root).

However, some plants can reproduce both asexually(such as cutting off the “sucker” of a tomato plant to propagate) and not (the pollinated flowers turn into tomatoes, which have seeds), so you can have both for your plant if you’d like.

Seed Dispersion:

If your plant needs help dispersing seeds, it might grow delicious fruit to lure animals, launch seeds in all directions (ballistic dispersal), or produce lightweight seeds that float on the wind, like dandelions.

Defense Mechanisms (Optional):

Does your plant defend itself from predators? If so, here are some fascinating examples:

• Silent Screams: Some plants emit sounds at frequencies we can’t hear, possibly to scare off predators or warn nearby plants of danger.
• A Stinky Warning: Tomato plants release airborne chemicals when attacked by pests, alerting nearby plants to produce their own insect repellents. Some plants release scents that attract the predators of the pests feeding on them.
• Spicy Defense: While humans might enjoy spicy foods, pests do not. Pepper plants increase their spiciness when under attack.
• No Touchy: One reason many plants have thorns or needles is as a way to protect themselves from being eaten. The stinging nettle plant has hollow needle-like hairs which inject histamine and other irritants upon contact.
• Playing Dead: When touched, the Mimosa pudica folds in it’s leaves then wilts, making itself less appealing to predators.
• A Touch of Poison. Many plants are poisonous, and can cause symptoms as mild as an upset stomach, or as severe as certain death.

Competitive Advantages:

How does your plant compete for resources? Does it have unique traits that give it an edge? Here are some real-life examples to inspire you:

• “Hearing” Water: Some roots will bend towards sound (phonotropism) in an attempt to find water. This is why trees sometimes wrap their roots around water pipes; the tree hasn’t touched the water, and yet still knows it is there.
• Counting: The Venus Fly Trap is a quick-closing carnivorous plant that will count the seconds between the touching of trigger hairs within it’s trap. If enough hairs are not touched within the right amount of seconds, it will not close. This is because it can take a whole day to reopen a trap and they can only be opened a handful of times, so it is in the plant’s best interest to only close if the chances are high it will catch something.
• Sharing Food: Using the mycorrhizal network(a network of thread-like mushroom roots called “mycelium,” which connects to the roots of trees) certain plant species will share nutrients between each other. For example, during times when the fir trees are still growing but the birch are leafless, the fir will send more carbon to the birch compared to other times in the year.
• Sniffing Out Prey: A dodder is a parasitic plant that hunts for it’s prey using scent.
• “Seeing” Plants: While it is well known that plants will bend towards light (therefore having some sort of way to detect and react to light), what you might not know is that there is a plant that goes beyond that. Boquila Trifoliolata mimics the appearance of other plants, and in one experiment, it was placed near an artificial vine but out of reach. Somehow, the Boquila Trifoliolata still managed to mimic the plant, indicating it was not doing so using scent nor touch.
• Making Friends: Trees will sometimes make “friends,” and will be careful not to cast too much shade over the friend, but will not give the same care to others.

The Appearance:

Ah yes, the part I know many of you wanted to jump to: the appearance. I saved this until here, because how you brainstormed those above can change how your plant looks. For example, if your plant wilts on touch like the Mimosa, it should be flexible.

Start by listing the traits you want, then look to real plants for inspiration. Combine their features and let your imagination fill in the rest.

Uses:

Many fantasy plants have practical uses, often based on real-life plants. I recommend basing your plant’s medicinal properties on real ones to avoid creating a “cure-all” that seem like an unrealistic cheat.

Here are some real-world examples:

• Meadowsweet: Pain relief and stomach soothing.
• Willow Bark: A potent natural pain reliever.
• Honey: Excellent for treating burns and wounds, it also helps prevent infection.
• Yarrow: Useful for stopping bleeding in emergencies.
• Old Mans Beard:  Infection Prevention. Simply put over the wound like a bandage.

There is also an extinct plant that might be useful inspiration to some writer out there; Silphium. This plant was supposedly such a reliable contraceptive that the Romans(in theory) picked it out of existence. The plant is even featured on one of their coins.

My Example:

Lantern Fruit is a plant I created for Where They Lurk. It’s a vine that grows in forests, climbing trees and bushes for protection and better access to sunlight. It produces soft purple flowers that turn into the purple fruit that gives it its name.

The citrus and floral tasting fruit (picture peach mixed with lavender) is used in pies, paired with meats, or mashed for drinks. High in vitamin C, Lantern Fruit is often brewed into tea or added to soup for those who are sick.

#writing #fantasy #worldbuilding #fantasyplants #writingfantasy #author

Even in the middle ages, time was important. In fact, in many places, bells would ring out to alert people of the time.

“Even before clocks are invented, bells are an important means of telling the time in towns and cities. In London the great bell of St. Martin’s le Grand is the one to listen out for. It is this bell which tells you when the markets are open, and when curfew starts. In a large city like London, where many bells are rung for a wide variety of reasons, knowing the sound each bell makes represents a third method of telling the time.

— “The Time Traveler’s Guide to Medieval England” by Ian Mortimer (2008)

It is true they might not have been as accurate as what we have today, but they did not have to be. Time was important in the middle ages, but for the average person, time was not measured right down to the minute like it is for people today. You met people or started work by the hours, not by minutes.

To start creating your own time system for your fantasy stories, you will need to know what moments of a day will be important to your people (example: the churches Canonical hours). Typically, the easiest ones are when the sun rises, when it is the highest point in the sky (noon), and when it sets. You could even add in the moon if you so chose, such as when the moon is highest in the sky (midnight).

“The first hour of their day is known as “prime.” The third hour (about 9 a.m.) is called “terce”; the sixth hour (noon) is “sext”; the ninth hour of the day (midafternoon), “nones”; and so on. The bells ring across the town for “vespers” at the twelfth hour.”

— “The Time Traveler’s Guide to Medieval England” by Ian Mortimer (2008)

After you know those, you’ll need to name those increments. You could number them, or name them based on the sun placement, or come up with completely unique names (perhaps based on the lighting of that time, or some religious/cultural story).

Now, you have your “hours,” as well as what people will call them. However, if you want your bell towers ringing out at more accurate times, you may want some sort of device the people can use so they are not trying to make an educated guess by the shadows around them or the placement of the sun (staring at the sun is not recommended haha). So, with that in mind, here are historical examples to help get you started:

Sundials

Sundials (as you might have guessed) use sunlight to tell time. To put it as simply as possible, you have some sort of circle or half-circle marked with your system of time keeping, you add something that will cast a shadow, then you line it up so that the shadow points at the correct marker at the correct time of day.

Of course, it is worth mentioning that these only work if the sun is out.

Sundials of various styles are found all around the world, and in your stories, they might be found anywhere with enough sunlight. Perhaps there is a large sundial in the center of the town and a caller screams out the times, perhaps it is on the wall of the town bell tower, or perhaps it is a crude version a farmer made by putting a stick in the ground with stones to mark time.

A scratch dial(AKA tide dial) with a graphic and text overlay showing how to read it. This type of sundial was often found on the outer walls of churches. (Image Source)

Candles

Like other time measurements mentioned, candles also had faults for time keeping (with both wind and wax quality both possibly altering the burn rate), but they had the major advantage of being able to be used in dark locations. This had candles of various types use in places for time keeping all around the world, with the earliest mention of a candle clock dating back to AD 520 in China.

(Image Source)

Water Clocks

For water-clocks(AKA clepsydra), time is “measured” by how long it takes water to either exit or enter a vessel.

“The Clepsydra appears to have been at first used to limit the time during which persons were allowed to speak in the Athenian Courts of Justice; ‘the first water/ says AEschines, ‘being given to the accuser, the second to the accused, and the third to the judges/ a special officer being appointed in the courts for the purpose of watching the Clepsydra and stopping it when any documents were read whereby the speaker was interrupted.”

— “Time and time-tellers” by James Benson (1875)

Some water-clocks are very small and simple (looking more like vases or bowls), while others were large and sometimes even implemented automaton. Depending on the build-style or size, water-clocks could be used for short increments, or even days.

One of the main possible faults that come with the water clock is evaporation rates.

“Diagram of a fancy clepsydra, this type being an automaton or self-adjusting machine. Water enters and raises the figure, which points at the current hour for the day. Spillover water operates a series of gears that rotates a cylinder so that hour lengths are appropriate for today’s date.” (Image Source)

Mechanical Clocks

For some reason, people often tend to think that mechanical clocks are a much more modern invention than they really were. The oldest surviving mechanical clock is from 1386 in Salisbury Cathedral, but they date back further than that. The first geared clock was actually a type of water clock that dates to 3rd century BC, and was invented by Archimedes.

Mechanical clocks are a machine that moves in equal intervals of time, and is connected to a counting mechanism which records the number of those movements. Many were weight-driven clocks, though in the 15th century, spring-driven clocks started to make an appearance.

Of course, like all the others, this has flaws as well, such as how temperatures might swell or contract metals, which might slightly alter the time for certain mechanical clocks (especially those using pendulums).

The only mechanical clocks you will come across are large turret clocks built into the bell towers of aristocratic palaces and some of the major abbeys and cathedrals. By the end of the century there are clocks in the cathedrals of Salisbury and Wells, and in several royal palaces and castles, including Westminster, Windsor, Queenborough, and King’s Langley. Chaucer refers to a clock in the abbey tower in his “Nun’s Priest’s Tale.” Obviously clocks regulate the day in a wholly different way, measuring eighteen hours of daylight and six of nighttime in summer (not twelve and twelve). For this reason there are two sorts of time in use simultaneously: clock time and solar time. So it is necessary to specify “hour of the clock” (our “o’clock”), if that is what you mean, in order to differentiate between the two. Note that clocks do not show the time; they announce it by ringing a bell on the hour. Thus you will find people speak not only of “hours of the clock” but also of “hours of the bell.

— “The Time Traveler’s Guide to Medieval England” by Ian Mortimer (2008)

“The Prague astronomical clock (in Old Town Square) was installed in 1410 by clock-makers Mikuláš of Kadaň and Jan Šindel, and is the oldest functioning Astronomical clock in the world.” (Image Source)

And there are more options too! For three bonus inspirations, look up hourglasses, incense clocks, and Astrolabes.

Now that you have your increments, what those time increments are called, and how people will keep track of them, you are ready to use them in your world building!

#worldbuilding #writingfantasy #fantasy #writing #writer