<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/">
  <channel>
    <title>Solar Panels Perth - Rooftop Energy Notes</title>
    <link>https://rant.li/solarpanelsperth/</link>
    <description>[Home](/solarpanelsperth/) · [Panels](/solarpanelsperth/tag:panels) · [Batteries](/solarpanelsperth/tag:batteries) · [All posts](/solarpanelsperth/archive/)</description>
    <pubDate>Mon, 16 Nov 2026 16:24:04 +0000</pubDate>
    <item>
      <title>Battery Ageing, Cycles and Throughput: Reading a Perth Home Battery Warranty Carefully</title>
      <link>https://rant.li/solarpanelsperth/battery-ageing-cycles-and-throughput-reading-a-perth-home-battery-warranty</link>
      <description>&lt;![CDATA[A home battery warranty should be read as a set of defined conditions, not as a promise that the original capacity will remain unchanged for a stated number of years. Calendar time, cycling, energy throughput, operating conditions and retained-capacity terms can all matter. For a Perth household, the practical task is to identify exactly what the manufacturer promises, how the relevant quantities are measured and what records would support a service enquiry.&#xA;&#xA;This guide explains those questions without predicting a particular battery&#39;s remaining life or inventing an annual degradation rate. The actual product documents, installation conditions and applicable consumer rights need their own assessment. A general explanation cannot replace a manufacturer&#39;s written response or qualified advice about a specific dispute.&#xA;&#xA;Start with the actual warranty document&#xA;&#xA;Obtain the full warranty for the model being quoted or already installed. Keep the version, purchase and installation dates, invoice, serial information and registration confirmation where required. A sales brochure may summarise a headline term while omitting conditions that affect coverage.&#xA;&#xA;Identify the party responsible for each promise. Product performance, workmanship, monitoring services and retailer offers can involve different organisations. A household should know where to report a fault and which documents are needed, rather than discovering the responsibility split only after a problem occurs.&#xA;&#xA;Do not assume a replacement product, later firmware or a different model in the same range has identical terms. Ask the supplier to identify the applicable document. If the wording changes after purchase, preserve the original version and obtain clarification rather than silently substituting a newer online page.&#xA;&#xA;Distinguish calendar ageing from cycling&#xA;&#xA;Calendar ageing concerns changes that occur with time, while cycling concerns the battery&#39;s charging and discharging history. These concepts help explain why elapsed years alone do not fully describe use. They do not justify applying a universal deterioration percentage to every household battery.&#xA;&#xA;A system can spend time at different states of charge and temperatures, and products can have different management strategies. The relevant operating limits and warranty conditions belong in the manufacturer documentation. Do not infer acceptable conditions from a neighbour&#39;s equipment or from a generic statement about battery chemistry.&#xA;&#xA;The Australian Government&#39;s guide to battery lifetime and warranty assessment explicitly lists years, cycles, throughput or combinations of these as ways expected life may be described. That is a reason to examine all the conditions together rather than treating the largest number on a brochure as the complete promise.&#xA;&#xA;Ask what the warranty means by a cycle&#xA;&#xA;A household app may show charging events, partial discharges or a cycle counter. These are not necessarily interchangeable with the warranty&#39;s definition. Ask whether the document uses full-equivalent cycles, another method or a specific manufacturer calculation, and request an explanation of how partial operation is counted.&#xA;&#xA;Do not count every movement in state of charge as a complete cycle unless the applicable definition says to do so. Equally, do not assume that a shallow daily movement has no relevance. The correct interpretation depends on the product and the agreed measurement method.&#xA;&#xA;Keep the manufacturer&#39;s explanation with the records. If a provider estimates future cycle use, ask which operating pattern it assumes and how VPP dispatch or grid charging is included. A forecast based on ordinary household operation may not describe a later service agreement that changes battery activity.&#xA;&#xA;Understand throughput and its measurement boundary&#xA;&#xA;Throughput generally concerns a quantity of energy processed, but the exact warranty definition matters. Ask whether the relevant total concerns charged energy, discharged energy, a specified connection point or another defined quantity. A portal total should not be treated as the warranty counter without confirmation.&#xA;&#xA;The same installation can report cell-side energy, inverter-side energy and energy crossing the grid meter. These boundaries can produce different totals without any arithmetic error. Keep the unit, direction and measurement point beside every figure used in a warranty assessment.&#xA;&#xA;| Warranty concept | Question to ask | Record to preserve |&#xA;|---|---|---|&#xA;| Time limit | When does the period begin? | Invoice, commissioning and registration dates |&#xA;| Cycle condition | What is counted and how? | Definition and available counter history |&#xA;| Throughput | Which energy flow and boundary apply? | Manufacturer definition and original exports |&#xA;| Retained capacity | Under what test conditions is it assessed? | Test method and service findings |&#xA;| Operating limits | Which environmental and control conditions matter? | Installation and service records |&#xA;| Remedy | What happens if a covered condition is met? | Full warranty and written correspondence |&#xA;&#xA;A clear table is more useful than an unexplained claim that the battery has used a certain fraction of its warranty. The calculation needs the applicable definition and reliable records before that conclusion can be supported.&#xA;&#xA;Separate nominal capacity from useful household energy&#xA;&#xA;Nominal capacity describes a product rating, while usable energy concerns what is available within the allowed operating range. A reserve setting and conversion losses can further affect ordinary household delivery. A lower discharge total does not automatically establish that the battery&#39;s underlying capacity has degraded.&#xA;&#xA;The official battery guide describes typical lithium-ion usable capacity as about 5% to 10% below actual capacity and typical charge-discharge losses as about 10%. These are general educational figures, not a warranty allowance or a diagnostic threshold. Use the exact product&#39;s specifications and the manufacturer&#39;s test method for a capacity concern.&#xA;&#xA;Do not subtract the same loss twice. An AC-delivered energy rating may already include effects that a cell-side figure excludes. Ask the provider to explain the boundary before comparing the label, the app and the warranty. Mixing them can make a healthy battery appear to have lost energy it was never promised to deliver at that boundary.&#xA;&#xA;Do not diagnose degradation from one evening&#xA;&#xA;A battery may supply less household energy because it began partly charged, held a backup reserve, exported under a control event or encountered a power or operating limit. The household load may also differ. A single short runtime is an observation, not a complete capacity test.&#xA;&#xA;Collect the state-of-charge timeline, charge and discharge records, operating mode, reserve and relevant events for the period. Keep the original files and note missing data. Ask the provider which further evidence is needed and whether a supervised test is appropriate.&#xA;&#xA;Do not force repeated deep discharges or alter protected settings to conduct an improvised capacity test. The assessment should follow the manufacturer&#39;s approved method and be carried out by the appropriate provider. A warranty concern does not justify creating a new safety, compliance or operating problem.&#xA;&#xA;Keep tariff optimisation separate from physical lifetime claims&#xA;&#xA;Charging and discharging at different times can change financial outcomes without making the same energy more physically valuable to the battery. A tariff-based strategy should be assessed for its actual cost, control conditions and warranty compatibility. Avoid a simple claim that more cycles are always good or always bad.&#xA;&#xA;The comparison of Perth household tariffs and solar timing provides background on the financial scheduling question. Confirm current retailer terms before using any example figures. Then ask the battery provider whether the proposed operating mode is supported and how its activity is treated under the warranty.&#xA;&#xA;The Australian Government&#39;s explanation of battery savings and VPP trade-offs notes that VPP participation may increase cycling, affect backup availability and have warranty implications. The actual agreement and product terms should be read together. A reward payment does not by itself establish that every operating consequence has been covered.&#xA;&#xA;Assess a VPP proposal before granting control&#xA;&#xA;Ask what the operator can control, how events are recorded, how reserve is handled and what happens if the internet connection fails. Identify the contracting party, duration, exit conditions and responsibility for any additional operating requirements. Keep the agreement version rather than relying on a current marketing page.&#xA;&#xA;Request a written explanation of warranty compatibility for the actual battery and service. A generic statement that a platform supports many brands is not the same as confirmation for a specific model, configuration and operating mode. If the parties give inconsistent answers, resolve that uncertainty before relying on the forecast.&#xA;&#xA;Track rewards and activity separately. Energy exported during a VPP event cannot also be counted as household import savings. Likewise, an upfront service discount is not recurring annual operating income. Financial clarity helps the household decide whether the offer is worthwhile without inventing a lifetime prediction.&#xA;&#xA;Avoid letting incentive size substitute for product assessment&#xA;&#xA;A rebate or discount can change the purchase price, but it does not establish expected lifetime, warranty quality or the usefulness of additional capacity. Keep the installed cost, incentive conditions, operating savings and service protections visible as separate parts of the decision.&#xA;&#xA;The discussion of battery incentive calculations and capacity tapering introduces one policy-related topic that should be checked against current official requirements. It is not a warranty document. A financially attractive discount does not remove the need to understand retained capacity, throughput and the remedy offered for a covered problem.&#xA;&#xA;Ask for the incremental cost and benefit of extra capacity rather than assuming the largest eligible product is the best value. A household needs enough useful energy and power for its purposes, not a purchase designed solely around a maximum incentive.&#xA;&#xA;Consider the solar resource without extrapolating a lifetime&#xA;&#xA;Charging opportunity changes with weather, shading, household use and season. That affects how often a battery can provide useful service. It does not allow the homeowner to predict product life by multiplying a convenient sunny period across future years.&#xA;&#xA;The guide to interpreting Perth solar exposure and seasonal generation provides background on that resource question. Use measured household operation and an appropriate forecast with visible uncertainty. Keep a distinction between the energy the solar array could produce, the energy available for charging and the energy the battery actually delivers.&#xA;&#xA;A provider should explain which future assumptions most affect the investment result. Prices, occupancy, a new vehicle or a different operating agreement can change the economics even if physical battery performance remains satisfactory. A warranty is not a guarantee of future retail savings.&#xA;&#xA;Preserve the evidence needed for a service enquiry&#xA;&#xA;Keep the original purchase documents, registration information, product warranty, commissioning record and service history. Add original monitoring exports where available, with units, date coverage and measurement definitions. Record relevant changes in firmware, reserve, tariff schedule and remote service participation.&#xA;&#xA;When describing a concern, state the expected behaviour, the observed behaviour and the period involved. Include exact warning messages and relevant events. Avoid an unsupported diagnosis such as the battery has lost half its life when the evidence only shows an unexpectedly short discharge period.&#xA;&#xA;When contacting Fusion Sun Solar or another provider, request written information about battery warranty and service assessment and ask which tests and records will be used. Keep the findings and proposed remedy. The public account record associated with this publishing project is included only for administrative attribution, not as independent technical evidence.&#xA;&#xA;Review the remedy as carefully as the headline term&#xA;&#xA;A warranty&#39;s value depends partly on what happens when a covered problem is established. Read the process, responsible party, exclusions and any stated approach to repair or replacement. Ask about associated labour, transport or other costs rather than assuming every expense is covered by a headline duration.&#xA;&#xA;Keep statutory consumer protections separate from a manufacturer&#39;s voluntary warranty and obtain appropriate advice where a dispute arises. This guide does not determine legal entitlement. The practical aim is to preserve a clear record so the relevant provider or adviser can assess the actual facts.&#xA;&#xA;Frequently asked questions&#xA;&#xA;Does a long warranty mean the original capacity never changes?&#xA;&#xA;No. Read the retained-capacity conditions, test method, time limits and any cycle or throughput provisions. The headline period is not the complete promise.&#xA;&#xA;Can I use the app&#39;s cycle count directly in a warranty calculation?&#xA;&#xA;Only after confirming it matches the applicable definition and measurement method. Charging events, partial cycles and full-equivalent cycles may be treated differently.&#xA;&#xA;Does a short runtime prove capacity loss?&#xA;&#xA;No. Starting charge, reserve, household load, power limits, exports and operating controls can change runtime. A proper assessment needs the relevant records and approved method.&#xA;&#xA;Will joining a VPP void the warranty?&#xA;&#xA;Do not assume either outcome. Obtain product- and service-specific written confirmation and read the actual agreement alongside the warranty.&#xA;&#xA;Can I predict the battery&#39;s remaining life from its age?&#xA;&#xA;Not reliably from age alone. Operating history, condition, product terms and the manufacturer&#39;s assessment matter. Avoid unsupported annual degradation assumptions.&#xA;&#xA;Conclusion&#xA;&#xA;Read a battery warranty through its definitions, measurement boundaries and practical remedy. Preserve original records and distinguish financial strategy from physical condition. That gives a Perth household a stronger basis for a purchase or service decision than a headline year count or an invented lifetime forecast.]]&gt;</description>
      <content:encoded><![CDATA[<p>A home battery warranty should be read as a set of defined conditions, not as a promise that the original capacity will remain unchanged for a stated number of years. Calendar time, cycling, energy throughput, operating conditions and retained-capacity terms can all matter. For a Perth household, the practical task is to identify exactly what the manufacturer promises, how the relevant quantities are measured and what records would support a service enquiry.</p>

<p>This guide explains those questions without predicting a particular battery&#39;s remaining life or inventing an annual degradation rate. The actual product documents, installation conditions and applicable consumer rights need their own assessment. A general explanation cannot replace a manufacturer&#39;s written response or qualified advice about a specific dispute.</p>

<h2 id="start-with-the-actual-warranty-document">Start with the actual warranty document</h2>

<p>Obtain the full warranty for the model being quoted or already installed. Keep the version, purchase and installation dates, invoice, serial information and registration confirmation where required. A sales brochure may summarise a headline term while omitting conditions that affect coverage.</p>

<p>Identify the party responsible for each promise. Product performance, workmanship, monitoring services and retailer offers can involve different organisations. A household should know where to report a fault and which documents are needed, rather than discovering the responsibility split only after a problem occurs.</p>

<p>Do not assume a replacement product, later firmware or a different model in the same range has identical terms. Ask the supplier to identify the applicable document. If the wording changes after purchase, preserve the original version and obtain clarification rather than silently substituting a newer online page.</p>

<h2 id="distinguish-calendar-ageing-from-cycling">Distinguish calendar ageing from cycling</h2>

<p>Calendar ageing concerns changes that occur with time, while cycling concerns the battery&#39;s charging and discharging history. These concepts help explain why elapsed years alone do not fully describe use. They do not justify applying a universal deterioration percentage to every household battery.</p>

<p>A system can spend time at different states of charge and temperatures, and products can have different management strategies. The relevant operating limits and warranty conditions belong in the manufacturer documentation. Do not infer acceptable conditions from a neighbour&#39;s equipment or from a generic statement about battery chemistry.</p>

<p>The Australian Government&#39;s <a href="https://www.energy.gov.au/solar/get-know-solar-technology/batteries" rel="nofollow">guide to battery lifetime and warranty assessment</a> explicitly lists years, cycles, throughput or combinations of these as ways expected life may be described. That is a reason to examine all the conditions together rather than treating the largest number on a brochure as the complete promise.</p>

<h2 id="ask-what-the-warranty-means-by-a-cycle">Ask what the warranty means by a cycle</h2>

<p>A household app may show charging events, partial discharges or a cycle counter. These are not necessarily interchangeable with the warranty&#39;s definition. Ask whether the document uses full-equivalent cycles, another method or a specific manufacturer calculation, and request an explanation of how partial operation is counted.</p>

<p>Do not count every movement in state of charge as a complete cycle unless the applicable definition says to do so. Equally, do not assume that a shallow daily movement has no relevance. The correct interpretation depends on the product and the agreed measurement method.</p>

<p>Keep the manufacturer&#39;s explanation with the records. If a provider estimates future cycle use, ask which operating pattern it assumes and how VPP dispatch or grid charging is included. A forecast based on ordinary household operation may not describe a later service agreement that changes battery activity.</p>

<h2 id="understand-throughput-and-its-measurement-boundary">Understand throughput and its measurement boundary</h2>

<p>Throughput generally concerns a quantity of energy processed, but the exact warranty definition matters. Ask whether the relevant total concerns charged energy, discharged energy, a specified connection point or another defined quantity. A portal total should not be treated as the warranty counter without confirmation.</p>

<p>The same installation can report cell-side energy, inverter-side energy and energy crossing the grid meter. These boundaries can produce different totals without any arithmetic error. Keep the unit, direction and measurement point beside every figure used in a warranty assessment.</p>

<table>
<thead>
<tr>
<th>Warranty concept</th>
<th>Question to ask</th>
<th>Record to preserve</th>
</tr>
</thead>

<tbody>
<tr>
<td>Time limit</td>
<td>When does the period begin?</td>
<td>Invoice, commissioning and registration dates</td>
</tr>

<tr>
<td>Cycle condition</td>
<td>What is counted and how?</td>
<td>Definition and available counter history</td>
</tr>

<tr>
<td>Throughput</td>
<td>Which energy flow and boundary apply?</td>
<td>Manufacturer definition and original exports</td>
</tr>

<tr>
<td>Retained capacity</td>
<td>Under what test conditions is it assessed?</td>
<td>Test method and service findings</td>
</tr>

<tr>
<td>Operating limits</td>
<td>Which environmental and control conditions matter?</td>
<td>Installation and service records</td>
</tr>

<tr>
<td>Remedy</td>
<td>What happens if a covered condition is met?</td>
<td>Full warranty and written correspondence</td>
</tr>
</tbody>
</table>

<p>A clear table is more useful than an unexplained claim that the battery has used a certain fraction of its warranty. The calculation needs the applicable definition and reliable records before that conclusion can be supported.</p>

<h2 id="separate-nominal-capacity-from-useful-household-energy">Separate nominal capacity from useful household energy</h2>

<p>Nominal capacity describes a product rating, while usable energy concerns what is available within the allowed operating range. A reserve setting and conversion losses can further affect ordinary household delivery. A lower discharge total does not automatically establish that the battery&#39;s underlying capacity has degraded.</p>

<p>The official battery guide describes typical lithium-ion usable capacity as about 5% to 10% below actual capacity and typical charge-discharge losses as about 10%. These are general educational figures, not a warranty allowance or a diagnostic threshold. Use the exact product&#39;s specifications and the manufacturer&#39;s test method for a capacity concern.</p>

<p>Do not subtract the same loss twice. An AC-delivered energy rating may already include effects that a cell-side figure excludes. Ask the provider to explain the boundary before comparing the label, the app and the warranty. Mixing them can make a healthy battery appear to have lost energy it was never promised to deliver at that boundary.</p>

<h2 id="do-not-diagnose-degradation-from-one-evening">Do not diagnose degradation from one evening</h2>

<p>A battery may supply less household energy because it began partly charged, held a backup reserve, exported under a control event or encountered a power or operating limit. The household load may also differ. A single short runtime is an observation, not a complete capacity test.</p>

<p>Collect the state-of-charge timeline, charge and discharge records, operating mode, reserve and relevant events for the period. Keep the original files and note missing data. Ask the provider which further evidence is needed and whether a supervised test is appropriate.</p>

<p>Do not force repeated deep discharges or alter protected settings to conduct an improvised capacity test. The assessment should follow the manufacturer&#39;s approved method and be carried out by the appropriate provider. A warranty concern does not justify creating a new safety, compliance or operating problem.</p>

<h2 id="keep-tariff-optimisation-separate-from-physical-lifetime-claims">Keep tariff optimisation separate from physical lifetime claims</h2>

<p>Charging and discharging at different times can change financial outcomes without making the same energy more physically valuable to the battery. A tariff-based strategy should be assessed for its actual cost, control conditions and warranty compatibility. Avoid a simple claim that more cycles are always good or always bad.</p>

<p>The <a href="https://solarpanelsperth.surge.sh/blog/synergy-midday-saver-vs-a1-solar-perth-2026.html" rel="nofollow">comparison of Perth household tariffs and solar timing</a> provides background on the financial scheduling question. Confirm current retailer terms before using any example figures. Then ask the battery provider whether the proposed operating mode is supported and how its activity is treated under the warranty.</p>

<p>The Australian Government&#39;s <a href="https://www.energy.gov.au/solar/financial-benefits-solar/how-solar-pays-itself-and-batteries-reduce-bills" rel="nofollow">explanation of battery savings and VPP trade-offs</a> notes that VPP participation may increase cycling, affect backup availability and have warranty implications. The actual agreement and product terms should be read together. A reward payment does not by itself establish that every operating consequence has been covered.</p>

<h2 id="assess-a-vpp-proposal-before-granting-control">Assess a VPP proposal before granting control</h2>

<p>Ask what the operator can control, how events are recorded, how reserve is handled and what happens if the internet connection fails. Identify the contracting party, duration, exit conditions and responsibility for any additional operating requirements. Keep the agreement version rather than relying on a current marketing page.</p>

<p>Request a written explanation of warranty compatibility for the actual battery and service. A generic statement that a platform supports many brands is not the same as confirmation for a specific model, configuration and operating mode. If the parties give inconsistent answers, resolve that uncertainty before relying on the forecast.</p>

<p>Track rewards and activity separately. Energy exported during a VPP event cannot also be counted as household import savings. Likewise, an upfront service discount is not recurring annual operating income. Financial clarity helps the household decide whether the offer is worthwhile without inventing a lifetime prediction.</p>

<h2 id="avoid-letting-incentive-size-substitute-for-product-assessment">Avoid letting incentive size substitute for product assessment</h2>

<p>A rebate or discount can change the purchase price, but it does not establish expected lifetime, warranty quality or the usefulness of additional capacity. Keep the installed cost, incentive conditions, operating savings and service protections visible as separate parts of the decision.</p>

<p>The <a href="https://solarpanelsperth.wasmer.app/blog/battery-rebate-taper-stc-maths-perth.html" rel="nofollow">discussion of battery incentive calculations and capacity tapering</a> introduces one policy-related topic that should be checked against current official requirements. It is not a warranty document. A financially attractive discount does not remove the need to understand retained capacity, throughput and the remedy offered for a covered problem.</p>

<p>Ask for the incremental cost and benefit of extra capacity rather than assuming the largest eligible product is the best value. A household needs enough useful energy and power for its purposes, not a purchase designed solely around a maximum incentive.</p>

<h2 id="consider-the-solar-resource-without-extrapolating-a-lifetime">Consider the solar resource without extrapolating a lifetime</h2>

<p>Charging opportunity changes with weather, shading, household use and season. That affects how often a battery can provide useful service. It does not allow the homeowner to predict product life by multiplying a convenient sunny period across future years.</p>

<p>The <a href="https://www.calameo.com/books/0083200618f4726381c99" rel="nofollow">guide to interpreting Perth solar exposure and seasonal generation</a> provides background on that resource question. Use measured household operation and an appropriate forecast with visible uncertainty. Keep a distinction between the energy the solar array could produce, the energy available for charging and the energy the battery actually delivers.</p>

<p>A provider should explain which future assumptions most affect the investment result. Prices, occupancy, a new vehicle or a different operating agreement can change the economics even if physical battery performance remains satisfactory. A warranty is not a guarantee of future retail savings.</p>

<h2 id="preserve-the-evidence-needed-for-a-service-enquiry">Preserve the evidence needed for a service enquiry</h2>

<p>Keep the original purchase documents, registration information, product warranty, commissioning record and service history. Add original monitoring exports where available, with units, date coverage and measurement definitions. Record relevant changes in firmware, reserve, tariff schedule and remote service participation.</p>

<p>When describing a concern, state the expected behaviour, the observed behaviour and the period involved. Include exact warning messages and relevant events. Avoid an unsupported diagnosis such as the battery has lost half its life when the evidence only shows an unexpectedly short discharge period.</p>

<p>When contacting Fusion Sun Solar or another provider, request <a href="https://fusionsunsolar.com.au/" rel="nofollow">written information about battery warranty and service assessment</a> and ask which tests and records will be used. Keep the findings and proposed remedy. The <a href="https://go.ndash.com/hire/solarpanelsperth" rel="nofollow">public account record associated with this publishing project</a> is included only for administrative attribution, not as independent technical evidence.</p>

<h2 id="review-the-remedy-as-carefully-as-the-headline-term">Review the remedy as carefully as the headline term</h2>

<p>A warranty&#39;s value depends partly on what happens when a covered problem is established. Read the process, responsible party, exclusions and any stated approach to repair or replacement. Ask about associated labour, transport or other costs rather than assuming every expense is covered by a headline duration.</p>

<p>Keep statutory consumer protections separate from a manufacturer&#39;s voluntary warranty and obtain appropriate advice where a dispute arises. This guide does not determine legal entitlement. The practical aim is to preserve a clear record so the relevant provider or adviser can assess the actual facts.</p>

<h2 id="frequently-asked-questions">Frequently asked questions</h2>

<h3 id="does-a-long-warranty-mean-the-original-capacity-never-changes">Does a long warranty mean the original capacity never changes?</h3>

<p>No. Read the retained-capacity conditions, test method, time limits and any cycle or throughput provisions. The headline period is not the complete promise.</p>

<h3 id="can-i-use-the-app-s-cycle-count-directly-in-a-warranty-calculation">Can I use the app&#39;s cycle count directly in a warranty calculation?</h3>

<p>Only after confirming it matches the applicable definition and measurement method. Charging events, partial cycles and full-equivalent cycles may be treated differently.</p>

<h3 id="does-a-short-runtime-prove-capacity-loss">Does a short runtime prove capacity loss?</h3>

<p>No. Starting charge, reserve, household load, power limits, exports and operating controls can change runtime. A proper assessment needs the relevant records and approved method.</p>

<h3 id="will-joining-a-vpp-void-the-warranty">Will joining a VPP void the warranty?</h3>

<p>Do not assume either outcome. Obtain product- and service-specific written confirmation and read the actual agreement alongside the warranty.</p>

<h3 id="can-i-predict-the-battery-s-remaining-life-from-its-age">Can I predict the battery&#39;s remaining life from its age?</h3>

<p>Not reliably from age alone. Operating history, condition, product terms and the manufacturer&#39;s assessment matter. Avoid unsupported annual degradation assumptions.</p>

<h2 id="conclusion">Conclusion</h2>

<p>Read a battery warranty through its definitions, measurement boundaries and practical remedy. Preserve original records and distinguish financial strategy from physical condition. That gives a Perth household a stronger basis for a purchase or service decision than a headline year count or an invented lifetime forecast.</p>
]]></content:encoded>
      <guid>https://rant.li/solarpanelsperth/battery-ageing-cycles-and-throughput-reading-a-perth-home-battery-warranty</guid>
      <pubDate>Tue, 10 Nov 2026 08:37:27 +0000</pubDate>
    </item>
    <item>
      <title>Running Air Conditioning in the 3pm to 9pm Peak on Midday Saver: Pre-Cooling, Batteries and Real Costs</title>
      <link>https://rant.li/solarpanelsperth/air-conditioning-peak-midday-saver-perth</link>
      <description>&lt;![CDATA[Short answer: on Synergy&#39;s 2026 Midday Saver plan, air conditioning that runs from 3pm to 9pm costs 55.3253c per unit, more than six times the 8.852c charged from 9am to 3pm. A ducted system drawing 2.5 kW for six evening hours uses about 15 units, roughly $8.30 a day. Pre-cooling the house at midday, using a battery for the evening, and sensible thermostat settings can cut that by half or more on hot Perth days.&#xA;&#xA;Why summer evenings are expensive&#xA;&#xA;Perth summer afternoons are hot, and houses keep absorbing heat until well after sunset. That is also when rooftop solar fades and the grid ramps up. AEMO recorded the WA main grid&#39;s record maximum demand of 4,486 MW on 20 January 2025, a hot summer day. Synergy&#39;s Midday Saver plan prices the 3pm to 9pm window at 55.3253c per unit to reflect this.&#xA;&#xA;| Synergy 2026 rate | Price per unit |&#xA;| --- | --- |&#xA;| Midday Saver 9am to 3pm | 8.8520c |&#xA;| Midday Saver 3pm to 9pm | 55.3253c |&#xA;| Midday Saver 9pm to 9am | 24.3431c |&#xA;| Home Plan (A1), any time | 33.2621c |&#xA;&#xA;How much power does air conditioning use?&#xA;&#xA;The electrical input of an air conditioner is much lower than its cooling capacity, because reverse-cycle systems move heat rather than create it. As a rough guide:&#xA;&#xA;A small split system in one room often draws under 1 kW&#xA;A large split system may draw 1.5 to 2.5 kW&#xA;A ducted system for a whole home may draw 2 to 4 kW or more on a hot day&#xA;&#xA;Check your model&#39;s rated input power on the label, or watch the inverter or battery app while it runs.&#xA;&#xA;The cost of a hot evening&#xA;&#xA;A ducted system averaging 2.5 kW from 3pm to 9pm uses 15 units:&#xA;&#xA;On Midday Saver: 15 x 55.3253c = $8.30&#xA;On Home Plan (A1): 15 x 33.2621c = $4.99&#xA;&#xA;For households that cannot change their habits, A1 can actually be cheaper in summer.&#xA;&#xA;Strategy 1: Pre-cool at midday&#xA;&#xA;Run the air conditioner harder from about 1pm to 3pm, cooling the house a couple of degrees below your usual setting while power costs 8.852c or comes from your own panels. Close blinds and doors to hold the cool. Then raise the thermostat slightly after 3pm.&#xA;&#xA;Example:&#xA;&#xA;Pre-cool: 2 hours at 3 kW = 6 units x 8.852c = $0.53&#xA;Evening: average falls to 1.5 kW, 9 units x 55.3253c = $4.98&#xA;Total: $5.51, compared with $8.30&#xA;&#xA;That is about $2.79 saved per hot day. Over 60 hot days, around $167.&#xA;&#xA;Strategy 2: Use a battery for the evening&#xA;&#xA;A battery charged by midday solar can run the air conditioner after 3pm. A 10 kWh usable battery can cover most of the 9 evening units in the pre-cooling example. If those units come from the battery, the evening cost drops close to zero, apart from the small 2c DEBS credit you give up by not exporting midday solar.&#xA;&#xA;Check that the battery&#39;s continuous output can handle the air conditioner plus cooking and other loads. A ducted system starting up alongside an oven can push demand above 5 kW.&#xA;&#xA;Strategy 3: Thermostat and zoning&#xA;&#xA;Set cooling to around 24 to 26 degrees rather than 20 to 22&#xA;Cool only occupied zones in the evening&#xA;Use ceiling fans to feel cooler at a higher setting&#xA;Keep filters clean so the system runs efficiently&#xA;&#xA;Strategy 4: Fix the building&#xA;&#xA;Shade west-facing windows with awnings or external blinds, seal gaps, and check ceiling insulation. These reduce heat gain in the late afternoon, which is exactly when cooling is most expensive.&#xA;&#xA;Which tariff is better for heavy evening cooling?&#xA;&#xA;If you have no battery and cannot pre-cool, the evening rate on Midday Saver can outweigh the cheap midday rate. Compare a summer bill on both plans using your interval data. With a battery that covers the evening, Midday Saver usually comes out ahead across the year.&#xA;&#xA;Winter heating too&#xA;&#xA;Reverse-cycle heating on winter evenings faces the same peak rate. Preheating from midday works in winter too, although Perth&#39;s June solar exposure, around 9.3 MJ/m² per day according to the Bureau of Meteorology, means less solar is available to do it.&#xA;&#xA;A summer checklist&#xA;&#xA;Check your air conditioner&#39;s input power.&#xA;Set a 1pm pre-cool schedule on hot days.&#xA;Close west-facing blinds by early afternoon.&#xA;Raise the setpoint after 3pm.&#xA;Watch the battery level from 6pm onwards.&#xA;Review your bill after the first hot month.&#xA;&#xA;An 8 kW all-in-one solar battery system is one option sized for evening cooling loads. Installers such as Fusion Sun Solar in Perth can check whether a battery can carry your air conditioner, and these Perth summer energy tips suggest further ways to stay cool for less.&#xA;&#xA;Frequently asked questions&#xA;&#xA;How much does evening air conditioning cost on Midday Saver?&#xA;About 55.3c per unit; a 2.5 kW ducted system for six hours costs about $8.30.&#xA;&#xA;Does pre-cooling work in Perth?&#xA;Yes. Cooling the house at midday reduces how hard the system works after 3pm.&#xA;&#xA;Can a battery run ducted air conditioning?&#xA;Often, if its continuous output is high enough for the system plus other loads.&#xA;&#xA;Is A1 better in summer?&#xA;Possibly, if you cannot shift cooling or cover it with a battery.&#xA;&#xA;Conclusion&#xA;&#xA;Air conditioning is the biggest single evening load in many Perth homes. Pre-cool with cheap midday power, cover the evening with stored solar, and the 3pm to 9pm window loses most of its sting.]]&gt;</description>
      <content:encoded><![CDATA[<p><strong>Short answer:</strong> on Synergy&#39;s 2026 Midday Saver plan, air conditioning that runs from 3pm to 9pm costs 55.3253c per unit, more than six times the 8.852c charged from 9am to 3pm. A ducted system drawing 2.5 kW for six evening hours uses about 15 units, roughly $8.30 a day. Pre-cooling the house at midday, using a battery for the evening, and sensible thermostat settings can cut that by half or more on hot Perth days.</p>

<h2 id="why-summer-evenings-are-expensive">Why summer evenings are expensive</h2>

<p>Perth summer afternoons are hot, and houses keep absorbing heat until well after sunset. That is also when rooftop solar fades and the grid ramps up. AEMO recorded the WA main grid&#39;s record maximum demand of 4,486 MW on 20 January 2025, a hot summer day. Synergy&#39;s Midday Saver plan prices the 3pm to 9pm window at 55.3253c per unit to reflect this.</p>

<table>
<thead>
<tr>
<th>Synergy 2026 rate</th>
<th>Price per unit</th>
</tr>
</thead>

<tbody>
<tr>
<td>Midday Saver 9am to 3pm</td>
<td>8.8520c</td>
</tr>

<tr>
<td>Midday Saver 3pm to 9pm</td>
<td>55.3253c</td>
</tr>

<tr>
<td>Midday Saver 9pm to 9am</td>
<td>24.3431c</td>
</tr>

<tr>
<td>Home Plan (A1), any time</td>
<td>33.2621c</td>
</tr>
</tbody>
</table>

<h2 id="how-much-power-does-air-conditioning-use">How much power does air conditioning use?</h2>

<p>The electrical input of an air conditioner is much lower than its cooling capacity, because reverse-cycle systems move heat rather than create it. As a rough guide:</p>
<ul><li>A small split system in one room often draws under 1 kW</li>
<li>A large split system may draw 1.5 to 2.5 kW</li>
<li>A ducted system for a whole home may draw 2 to 4 kW or more on a hot day</li></ul>

<p>Check your model&#39;s rated input power on the label, or watch the inverter or battery app while it runs.</p>

<h2 id="the-cost-of-a-hot-evening">The cost of a hot evening</h2>

<p>A ducted system averaging 2.5 kW from 3pm to 9pm uses 15 units:</p>
<ul><li>On Midday Saver: 15 x 55.3253c = $8.30</li>
<li>On Home Plan (A1): 15 x 33.2621c = $4.99</li></ul>

<p>For households that cannot change their habits, A1 can actually be cheaper in summer.</p>

<h2 id="strategy-1-pre-cool-at-midday">Strategy 1: Pre-cool at midday</h2>

<p>Run the air conditioner harder from about 1pm to 3pm, cooling the house a couple of degrees below your usual setting while power costs 8.852c or comes from your own panels. Close blinds and doors to hold the cool. Then raise the thermostat slightly after 3pm.</p>

<p>Example:</p>
<ul><li>Pre-cool: 2 hours at 3 kW = 6 units x 8.852c = $0.53</li>
<li>Evening: average falls to 1.5 kW, 9 units x 55.3253c = $4.98</li>
<li>Total: $5.51, compared with $8.30</li></ul>

<p>That is about $2.79 saved per hot day. Over 60 hot days, around $167.</p>

<h2 id="strategy-2-use-a-battery-for-the-evening">Strategy 2: Use a battery for the evening</h2>

<p>A battery charged by midday solar can run the air conditioner after 3pm. A 10 kWh usable battery can cover most of the 9 evening units in the pre-cooling example. If those units come from the battery, the evening cost drops close to zero, apart from the small 2c DEBS credit you give up by not exporting midday solar.</p>

<p>Check that the battery&#39;s continuous output can handle the air conditioner plus cooking and other loads. A ducted system starting up alongside an oven can push demand above 5 kW.</p>

<h2 id="strategy-3-thermostat-and-zoning">Strategy 3: Thermostat and zoning</h2>
<ul><li>Set cooling to around 24 to 26 degrees rather than 20 to 22</li>
<li>Cool only occupied zones in the evening</li>
<li>Use ceiling fans to feel cooler at a higher setting</li>
<li>Keep filters clean so the system runs efficiently</li></ul>

<h2 id="strategy-4-fix-the-building">Strategy 4: Fix the building</h2>

<p>Shade west-facing windows with awnings or external blinds, seal gaps, and check ceiling insulation. These reduce heat gain in the late afternoon, which is exactly when cooling is most expensive.</p>

<h2 id="which-tariff-is-better-for-heavy-evening-cooling">Which tariff is better for heavy evening cooling?</h2>

<p>If you have no battery and cannot pre-cool, the evening rate on Midday Saver can outweigh the cheap midday rate. Compare a summer bill on both plans using your interval data. With a battery that covers the evening, Midday Saver usually comes out ahead across the year.</p>

<h2 id="winter-heating-too">Winter heating too</h2>

<p>Reverse-cycle heating on winter evenings faces the same peak rate. Preheating from midday works in winter too, although Perth&#39;s June solar exposure, around 9.3 MJ/m² per day according to the Bureau of Meteorology, means less solar is available to do it.</p>

<h2 id="a-summer-checklist">A summer checklist</h2>
<ol><li>Check your air conditioner&#39;s input power.</li>
<li>Set a 1pm pre-cool schedule on hot days.</li>
<li>Close west-facing blinds by early afternoon.</li>
<li>Raise the setpoint after 3pm.</li>
<li>Watch the battery level from 6pm onwards.</li>
<li>Review your bill after the first hot month.</li></ol>

<p>An <a href="https://fusionsunsolar.com.au/goodwe-esa-8kw-all-in-one-system/" rel="nofollow">8 kW all-in-one solar battery system</a> is one option sized for evening cooling loads. Installers such as <a href="https://fusionsunsolar.com.au/" rel="nofollow">Fusion Sun Solar in Perth</a> can check whether a battery can carry your air conditioner, and <a href="https://au.blurb.com/user/solarenergyp" rel="nofollow">these Perth summer energy tips</a> suggest further ways to stay cool for less.</p>

<h2 id="frequently-asked-questions">Frequently asked questions</h2>

<h3 id="how-much-does-evening-air-conditioning-cost-on-midday-saver">How much does evening air conditioning cost on Midday Saver?</h3>

<p>About 55.3c per unit; a 2.5 kW ducted system for six hours costs about $8.30.</p>

<h3 id="does-pre-cooling-work-in-perth">Does pre-cooling work in Perth?</h3>

<p>Yes. Cooling the house at midday reduces how hard the system works after 3pm.</p>

<h3 id="can-a-battery-run-ducted-air-conditioning">Can a battery run ducted air conditioning?</h3>

<p>Often, if its continuous output is high enough for the system plus other loads.</p>

<h3 id="is-a1-better-in-summer">Is A1 better in summer?</h3>

<p>Possibly, if you cannot shift cooling or cover it with a battery.</p>

<h2 id="conclusion">Conclusion</h2>

<p>Air conditioning is the biggest single evening load in many Perth homes. Pre-cool with cheap midday power, cover the evening with stored solar, and the 3pm to 9pm window loses most of its sting.</p>
]]></content:encoded>
      <guid>https://rant.li/solarpanelsperth/air-conditioning-peak-midday-saver-perth</guid>
      <pubDate>Mon, 09 Nov 2026 04:28:51 +0000</pubDate>
    </item>
    <item>
      <title>Buying a Perth Home That Already Has Solar: What to Check Before Settlement</title>
      <link>https://rant.li/solarpanelsperth/buying-a-perth-home-that-already-has-solar-what-to-check-before-settlement</link>
      <description>&lt;![CDATA[More Perth homes are listed with solar panels already on the roof, and many listings mention batteries too. Solar can be a genuine bonus for buyers, but an older or poorly maintained system can also bring costs. This guide covers what to check before you buy, and what to do after settlement.&#xA;&#xA;Ask for the paperwork&#xA;&#xA;Request documents from the seller or agent:&#xA;&#xA;Original installation invoice and date.&#xA;Panel and inverter make, model and serial numbers.&#xA;Electrical certificate of compliance.&#xA;Warranty documents for panels, inverter and any battery.&#xA;Monitoring app login details.&#xA;Any service or repair records.&#xA;&#xA;Missing paperwork does not necessarily mean a problem, but it makes warranty claims harder. Ask the seller to locate what they can.&#xA;&#xA;Check the system&#39;s age and size&#xA;&#xA;The age of a system matters. Panels typically last 25 years or more, while string inverters often last 10 to 15 years. A system installed in 2012 may have a working inverter nearing the end of its life. Factor potential replacement into your offer.&#xA;&#xA;System size matters too. Older systems were often 1.5 to 3 kW, much smaller than today&#39;s typical 6.6 kW. A small system still produces useful energy but may not significantly offset a modern household&#39;s use.&#xA;&#xA;Look at the inverter&#xA;&#xA;Find the inverter, usually near the meter box or in a garage. Check:&#xA;&#xA;Is it on and showing a normal status (often a green light)?&#xA;Are there error messages?&#xA;Is it in direct afternoon sun, which shortens life?&#xA;Does it look damaged, discoloured or water-stained?&#xA;&#xA;Ask the seller to show recent generation data in the monitoring app or on the inverter display.&#xA;&#xA;Check the roof&#xA;&#xA;From the ground or a drone image, look at panel condition, cracked glass, discolouration, heavy soiling or bird nesting. Ask the building inspector to note visible issues with mounting or cabling, and whether rooftop isolators look sun-damaged.&#xA;&#xA;Feed-in arrangements do not always transfer&#xA;&#xA;In WA, buyback arrangements depend on the account holder and the scheme in place at the time. Older schemes may not transfer to a new owner. After settlement, you will usually receive current Distributed Energy Buyback Scheme rates. Ask Synergy about what applies when you set up your account.&#xA;&#xA;Batteries need extra checks&#xA;&#xA;If the home has a battery, confirm:&#xA;&#xA;Make, model and installation date.&#xA;Warranty conditions, including any transfer requirements.&#xA;Whether it is connected to a virtual power plant or retailer program, and whether that contract transfers.&#xA;That it was installed in a compliant location.&#xA;&#xA;Read about VPP requirements for WA solar battery rebates because batteries installed with rebate support may carry ongoing program obligations.&#xA;&#xA;Include a condition in your offer&#xA;&#xA;If you are unsure about the system, consider making your offer subject to a satisfactory solar inspection. A licensed electrician or solar technician can test the system, check safety and report on condition. It is a small cost compared with replacing an inverter unexpectedly.&#xA;&#xA;After settlement: set yourself up&#xA;&#xA;Set up your electricity account and confirm your meter records exports.&#xA;Transfer or create monitoring app access.&#xA;Register warranties in your name where manufacturers allow it.&#xA;Locate the shutdown procedure at the meter box.&#xA;Book a service if the system has no recent maintenance records.&#xA;&#xA;Buyers often compare experiences online after moving into homes with solar, and community profiles such as the Solar Energy Perth member profile on dohtheme.com are one place where practical notes get shared. Use this as general information alongside professional advice.&#xA;&#xA;Upgrading an inherited system&#xA;&#xA;If the existing system is small, you may want to expand it. Adding panels to an old system can be complex because of inverter compatibility and export rules. Sometimes replacing the inverter and adding panels together is more practical. Get advice before buying extra panels.&#xA;&#xA;When to replace instead&#xA;&#xA;A very old, small system with a failing inverter may be best replaced with a modern system sized for your needs. Panels from older systems can sometimes be recycled through WA programs.&#xA;&#xA;Getting a professional check&#xA;&#xA;A post-purchase inspection gives peace of mind. A local business such as local Perth solar and battery installer Fusion Sun Solar can inspect an existing system, test performance and advise whether to keep, upgrade or replace it.&#xA;&#xA;Frequently Asked Questions&#xA;&#xA;Does the solar system add value to the home? It can add appeal for buyers and lower running costs, but the value depends on age, size and condition.&#xA;&#xA;Can the seller leave the monitoring login? Ask for it. If not available, the installer or manufacturer can usually help set up a new account.&#xA;&#xA;Who is responsible for repairs after settlement? Once settled, the system is yours. Manufacturer warranties may still apply if they transfer.&#xA;&#xA;Questions to Ask Before You Sign&#xA;&#xA;Before signing a contract on a home with solar, put a few questions to the selling agent in writing. Ask for the installation date, the system size, the panel and inverter brands and the name of the installer. Ask whether the system has been serviced, whether any parts have been replaced, and whether there have been any faults or error messages in recent months.&#xA;&#xA;If the home has a battery, ask whether it is enrolled in a virtual power plant or a retailer program, and whether that arrangement can be transferred or must be cancelled. Some battery rebate conditions involve connection to a program, so understand what applies before you settle.&#xA;&#xA;During the building inspection, ask the inspector to note the condition of the panels, roof penetrations and isolators. Visual checks will not test output, but they can reveal cracked panels, loose conduit or signs of water entry. After settlement, compare the first few weeks of generation with what a system of that size should produce in Perth. A large gap is worth investigating early, while memory of the sale and any warranty details are still fresh.&#xA;&#xA;Ask whether the feed-in arrangement transfers with the property. When ownership changes, the new owner normally sets up their own electricity account, and the export tariff applies to the new account. Contact Synergy after settlement to confirm the solar export credits are set up correctly from the first bill.&#xA;&#xA;Summary&#xA;&#xA;Solar on a house you are buying can be a real asset, but check its age, paperwork, inverter condition and any battery contracts before settlement. Consider an inspection condition, set up your account and monitoring after you move in, and plan for future upgrades or replacement as the system ages.&#xA;]]&gt;</description>
      <content:encoded><![CDATA[<p>More Perth homes are listed with solar panels already on the roof, and many listings mention batteries too. Solar can be a genuine bonus for buyers, but an older or poorly maintained system can also bring costs. This guide covers what to check before you buy, and what to do after settlement.</p>

<h2 id="ask-for-the-paperwork">Ask for the paperwork</h2>

<p>Request documents from the seller or agent:</p>
<ul><li>Original installation invoice and date.</li>
<li>Panel and inverter make, model and serial numbers.</li>
<li>Electrical certificate of compliance.</li>
<li>Warranty documents for panels, inverter and any battery.</li>
<li>Monitoring app login details.</li>
<li>Any service or repair records.</li></ul>

<p>Missing paperwork does not necessarily mean a problem, but it makes warranty claims harder. Ask the seller to locate what they can.</p>

<h2 id="check-the-system-s-age-and-size">Check the system&#39;s age and size</h2>

<p>The age of a system matters. Panels typically last 25 years or more, while string inverters often last 10 to 15 years. A system installed in 2012 may have a working inverter nearing the end of its life. Factor potential replacement into your offer.</p>

<p>System size matters too. Older systems were often 1.5 to 3 kW, much smaller than today&#39;s typical 6.6 kW. A small system still produces useful energy but may not significantly offset a modern household&#39;s use.</p>

<h2 id="look-at-the-inverter">Look at the inverter</h2>

<p>Find the inverter, usually near the meter box or in a garage. Check:</p>
<ul><li>Is it on and showing a normal status (often a green light)?</li>
<li>Are there error messages?</li>
<li>Is it in direct afternoon sun, which shortens life?</li>
<li>Does it look damaged, discoloured or water-stained?</li></ul>

<p>Ask the seller to show recent generation data in the monitoring app or on the inverter display.</p>

<h2 id="check-the-roof">Check the roof</h2>

<p>From the ground or a drone image, look at panel condition, cracked glass, discolouration, heavy soiling or bird nesting. Ask the building inspector to note visible issues with mounting or cabling, and whether rooftop isolators look sun-damaged.</p>

<h2 id="feed-in-arrangements-do-not-always-transfer">Feed-in arrangements do not always transfer</h2>

<p>In WA, buyback arrangements depend on the account holder and the scheme in place at the time. Older schemes may not transfer to a new owner. After settlement, you will usually receive current Distributed Energy Buyback Scheme rates. Ask Synergy about what applies when you set up your account.</p>

<h2 id="batteries-need-extra-checks">Batteries need extra checks</h2>

<p>If the home has a battery, confirm:</p>
<ul><li>Make, model and installation date.</li>
<li>Warranty conditions, including any transfer requirements.</li>
<li>Whether it is connected to a virtual power plant or retailer program, and whether that contract transfers.</li>
<li>That it was installed in a compliant location.</li></ul>

<p>Read about <a href="https://fusionsunsolar.com.au/vpp-requirements-for-wa-solar-battery-rebates/" rel="nofollow">VPP requirements for WA solar battery rebates</a> because batteries installed with rebate support may carry ongoing program obligations.</p>

<h2 id="include-a-condition-in-your-offer">Include a condition in your offer</h2>

<p>If you are unsure about the system, consider making your offer subject to a satisfactory solar inspection. A licensed electrician or solar technician can test the system, check safety and report on condition. It is a small cost compared with replacing an inverter unexpectedly.</p>

<h2 id="after-settlement-set-yourself-up">After settlement: set yourself up</h2>
<ol><li>Set up your electricity account and confirm your meter records exports.</li>
<li>Transfer or create monitoring app access.</li>
<li>Register warranties in your name where manufacturers allow it.</li>
<li>Locate the shutdown procedure at the meter box.</li>
<li>Book a service if the system has no recent maintenance records.</li></ol>

<p>Buyers often compare experiences online after moving into homes with solar, and community profiles such as <a href="https://www.dohtheme.com/community/members/solarenergyperth.123034/about" rel="nofollow">the Solar Energy Perth member profile on dohtheme.com</a> are one place where practical notes get shared. Use this as general information alongside professional advice.</p>

<h2 id="upgrading-an-inherited-system">Upgrading an inherited system</h2>

<p>If the existing system is small, you may want to expand it. Adding panels to an old system can be complex because of inverter compatibility and export rules. Sometimes replacing the inverter and adding panels together is more practical. Get advice before buying extra panels.</p>

<h2 id="when-to-replace-instead">When to replace instead</h2>

<p>A very old, small system with a failing inverter may be best replaced with a modern system sized for your needs. Panels from older systems can sometimes be recycled through WA programs.</p>

<h2 id="getting-a-professional-check">Getting a professional check</h2>

<p>A post-purchase inspection gives peace of mind. A local business such as <a href="https://fusionsunsolar.com.au/" rel="nofollow">local Perth solar and battery installer Fusion Sun Solar</a> can inspect an existing system, test performance and advise whether to keep, upgrade or replace it.</p>

<h2 id="frequently-asked-questions">Frequently Asked Questions</h2>

<p><strong>Does the solar system add value to the home?</strong> It can add appeal for buyers and lower running costs, but the value depends on age, size and condition.</p>

<p><strong>Can the seller leave the monitoring login?</strong> Ask for it. If not available, the installer or manufacturer can usually help set up a new account.</p>

<p><strong>Who is responsible for repairs after settlement?</strong> Once settled, the system is yours. Manufacturer warranties may still apply if they transfer.</p>

<h2 id="questions-to-ask-before-you-sign">Questions to Ask Before You Sign</h2>

<p>Before signing a contract on a home with solar, put a few questions to the selling agent in writing. Ask for the installation date, the system size, the panel and inverter brands and the name of the installer. Ask whether the system has been serviced, whether any parts have been replaced, and whether there have been any faults or error messages in recent months.</p>

<p>If the home has a battery, ask whether it is enrolled in a virtual power plant or a retailer program, and whether that arrangement can be transferred or must be cancelled. Some battery rebate conditions involve connection to a program, so understand what applies before you settle.</p>

<p>During the building inspection, ask the inspector to note the condition of the panels, roof penetrations and isolators. Visual checks will not test output, but they can reveal cracked panels, loose conduit or signs of water entry. After settlement, compare the first few weeks of generation with what a system of that size should produce in Perth. A large gap is worth investigating early, while memory of the sale and any warranty details are still fresh.</p>

<p>Ask whether the feed-in arrangement transfers with the property. When ownership changes, the new owner normally sets up their own electricity account, and the export tariff applies to the new account. Contact Synergy after settlement to confirm the solar export credits are set up correctly from the first bill.</p>

<h2 id="summary">Summary</h2>

<p>Solar on a house you are buying can be a real asset, but check its age, paperwork, inverter condition and any battery contracts before settlement. Consider an inspection condition, set up your account and monitoring after you move in, and plan for future upgrades or replacement as the system ages.</p>
]]></content:encoded>
      <guid>https://rant.li/solarpanelsperth/buying-a-perth-home-that-already-has-solar-what-to-check-before-settlement</guid>
      <pubDate>Sun, 01 Nov 2026 16:07:52 +0000</pubDate>
    </item>
    <item>
      <title>LFP or NMC? Battery Chemistry and What It Means for a Perth Garage</title>
      <link>https://rant.li/solarpanelsperth/lfp-or-nmc</link>
      <description>&lt;![CDATA[Most home batteries sold in Australia today use lithium-ion cells, but &#34;lithium-ion&#34; covers several different chemistries. The two you are most likely to see on a spec sheet are lithium iron phosphate, called LFP or LiFePO4, and nickel manganese cobalt, called NMC. The choice affects safety margins, lifespan, size and how well a battery copes with a hot Perth garage.&#xA;&#xA;A quick introduction&#xA;&#xA;LFP uses iron and phosphate in its cathode. It is generally considered very stable, tolerates heat well, and handles many charge cycles. Its main drawback is lower energy density, which means LFP batteries are heavier and larger for the same capacity.&#xA;&#xA;NMC uses nickel, manganese and cobalt. It packs more energy into less space and weight, which is why it dominated electric cars for years. It can be more sensitive to high temperatures, and some versions have a shorter cycle life than LFP.&#xA;&#xA;Thermal stability and safety&#xA;&#xA;Both chemistries are used safely in certified home batteries, which include management systems that monitor temperature, voltage and current. However, LFP has a higher threshold before thermal runaway, the chain reaction that can lead to fire. Partly for this reason, the home battery market has moved strongly towards LFP over the past few years.&#xA;&#xA;Regardless of chemistry, installation must follow Australian Standard AS/NZS 5139, which sets rules on where batteries can go, clearances from doors and windows, and barriers between batteries and living areas.&#xA;&#xA;Heat in Perth&#xA;&#xA;Perth garages and external walls can get very hot in summer, particularly if facing west. High temperatures accelerate battery aging, and many batteries reduce their charge or discharge rate when hot to protect themselves. LFP cells generally cope better with heat, but every battery benefits from:&#xA;&#xA;Shade from direct afternoon sun.&#xA;Good airflow around the unit.&#xA;Following the manufacturer&#39;s installation temperature limits.&#xA;&#xA;An installer should look at where the battery will go and think about summer temperatures, not just convenience.&#xA;&#xA;Cycle life and warranties&#xA;&#xA;LFP batteries often come with warranties covering 10 years or a certain number of cycles or energy throughput, and many are rated for 6,000 cycles or more. NMC batteries typically come with similar 10-year warranties but may have lower throughput limits. The warranty terms, rather than the chemistry label alone, tell you what the manufacturer is prepared to stand behind.&#xA;&#xA;When comparing, check:&#xA;&#xA;Warranty length.&#xA;Guaranteed capacity at end of warranty, such as 60% or 70%.&#xA;Energy throughput limit in megawatt-hours.&#xA;Any conditions about installation location or temperature.&#xA;&#xA;Size and weight&#xA;&#xA;If wall space is tight, NMC&#39;s compact size can be an advantage. LFP batteries for the same capacity may be bulkier. For most Perth homes with a garage or side wall, this is not a deal-breaker, but it can matter in townhouses or homes with limited suitable locations.&#xA;&#xA;Which should you choose?&#xA;&#xA;For most Perth households, an LFP battery is a sensible default: robust in heat, long-lasting and widely available. NMC can still be a reasonable choice in a well-designed, certified product with a strong warranty, especially where space is limited. What matters most is quality, certification, installation location and warranty.&#xA;&#xA;If you enjoy tinkering with batteries, there are communities of DIY enthusiasts online; you can find one through a user page on a discussion forum. Bear in mind that a home battery connected to your switchboard must be installed by a licensed professional.&#xA;&#xA;For local advice about which battery suits your home, the battery specialists at Fusion Sun Solar or another accredited installer can explain the options and the location rules for your property.&#xA;&#xA;Fire safety basics&#xA;&#xA;Whatever the chemistry, keep the battery area free of stored fuel, chemicals and clutter, and make sure a working smoke alarm is nearby, ideally interconnected with the house alarms.&#xA;&#xA;Summary&#xA;&#xA;LFP and NMC are both proven chemistries, but LFP&#39;s heat tolerance and long life suit Perth conditions well. Whatever you choose, focus on certification, installation location and the details of the warranty.&#xA;]]&gt;</description>
      <content:encoded><![CDATA[<p>Most home batteries sold in Australia today use lithium-ion cells, but “lithium-ion” covers several different chemistries. The two you are most likely to see on a spec sheet are lithium iron phosphate, called LFP or LiFePO4, and nickel manganese cobalt, called NMC. The choice affects safety margins, lifespan, size and how well a battery copes with a hot Perth garage.</p>

<h2 id="a-quick-introduction">A quick introduction</h2>

<p><strong>LFP</strong> uses iron and phosphate in its cathode. It is generally considered very stable, tolerates heat well, and handles many charge cycles. Its main drawback is lower energy density, which means LFP batteries are heavier and larger for the same capacity.</p>

<p><strong>NMC</strong> uses nickel, manganese and cobalt. It packs more energy into less space and weight, which is why it dominated electric cars for years. It can be more sensitive to high temperatures, and some versions have a shorter cycle life than LFP.</p>

<h2 id="thermal-stability-and-safety">Thermal stability and safety</h2>

<p>Both chemistries are used safely in certified home batteries, which include management systems that monitor temperature, voltage and current. However, LFP has a higher threshold before thermal runaway, the chain reaction that can lead to fire. Partly for this reason, the home battery market has moved strongly towards LFP over the past few years.</p>

<p>Regardless of chemistry, installation must follow Australian Standard AS/NZS 5139, which sets rules on where batteries can go, clearances from doors and windows, and barriers between batteries and living areas.</p>

<h2 id="heat-in-perth">Heat in Perth</h2>

<p>Perth garages and external walls can get very hot in summer, particularly if facing west. High temperatures accelerate battery aging, and many batteries reduce their charge or discharge rate when hot to protect themselves. LFP cells generally cope better with heat, but every battery benefits from:</p>
<ul><li>Shade from direct afternoon sun.</li>
<li>Good airflow around the unit.</li>
<li>Following the manufacturer&#39;s installation temperature limits.</li></ul>

<p>An installer should look at where the battery will go and think about summer temperatures, not just convenience.</p>

<h2 id="cycle-life-and-warranties">Cycle life and warranties</h2>

<p>LFP batteries often come with warranties covering 10 years or a certain number of cycles or energy throughput, and many are rated for 6,000 cycles or more. NMC batteries typically come with similar 10-year warranties but may have lower throughput limits. The warranty terms, rather than the chemistry label alone, tell you what the manufacturer is prepared to stand behind.</p>

<p>When comparing, check:</p>
<ol><li>Warranty length.</li>
<li>Guaranteed capacity at end of warranty, such as 60% or 70%.</li>
<li>Energy throughput limit in megawatt-hours.</li>
<li>Any conditions about installation location or temperature.</li></ol>

<h2 id="size-and-weight">Size and weight</h2>

<p>If wall space is tight, NMC&#39;s compact size can be an advantage. LFP batteries for the same capacity may be bulkier. For most Perth homes with a garage or side wall, this is not a deal-breaker, but it can matter in townhouses or homes with limited suitable locations.</p>

<h2 id="which-should-you-choose">Which should you choose?</h2>

<p>For most Perth households, an LFP battery is a sensible default: robust in heat, long-lasting and widely available. NMC can still be a reasonable choice in a well-designed, certified product with a strong warranty, especially where space is limited. What matters most is quality, certification, installation location and warranty.</p>

<p>If you enjoy tinkering with batteries, there are communities of DIY enthusiasts online; you can find one through <a href="https://phatwalletforums.com/user/solarenergyperth" rel="nofollow">a user page on a discussion forum</a>. Bear in mind that a home battery connected to your switchboard must be installed by a licensed professional.</p>

<p>For local advice about which battery suits your home, <a href="https://fusionsunsolar.com.au" rel="nofollow">the battery specialists at Fusion Sun Solar</a> or another accredited installer can explain the options and the location rules for your property.</p>

<h2 id="fire-safety-basics">Fire safety basics</h2>

<p>Whatever the chemistry, keep the battery area free of stored fuel, chemicals and clutter, and make sure a working smoke alarm is nearby, ideally interconnected with the house alarms.</p>

<h2 id="summary">Summary</h2>

<p>LFP and NMC are both proven chemistries, but LFP&#39;s heat tolerance and long life suit Perth conditions well. Whatever you choose, focus on certification, installation location and the details of the warranty.</p>
]]></content:encoded>
      <guid>https://rant.li/solarpanelsperth/lfp-or-nmc</guid>
      <pubDate>Sun, 01 Nov 2026 13:28:49 +0000</pubDate>
    </item>
    <item>
      <title>How WA Solar Tariffs Changed: Feed-In and Electricity Prices Explained</title>
      <link>https://rant.li/solarpanelsperth/how-wa-solar-tariffs-changed-feed-in-and-electricity-prices-explained</link>
      <description>&lt;![CDATA[Ask a group of Perth solar owners what they get paid for exported rooftop power and you will hear very different answers. Long-time owners remember the generous 40-cent state feed-in tariff of 2010, mid-decade households still receive just over 7 cents on a grandfathered flat rate, and anyone installing or upgrading today earns 2 cents during the day and 10 cents in the late afternoon. Tracing the WA solar feed-in tariff history explains why the economics of rooftop solar in the South West Interconnected System (SWIS) have shifted decisively from grid exports to self-consumption, and why home battery storage now sits at the centre of household energy planning.&#xA;&#xA;Every regulated rate below comes from official Energy Policy WA and Synergy tariff schedules current to 1 July 2026 (including GST). Because tariffs and scheme rules are reviewed annually, always confirm your meter configuration and eligibility with Synergy, Western Power or Horizon Power before altering an existing system.&#xA;&#xA;The 2010–2011 Feed-In Scheme: 40 Cents and 20 Cents&#xA;&#xA;Western Australia&#39;s first major residential solar boom began on 1 July 2010, when the State Government opened the residential Feed-in Scheme (often called the net feed-in tariff). Households that applied received a state-funded premium of 40 cents per kilowatt-hour (c/kWh) for electricity exported to the grid for a fixed 10-year period from the date of application, paid on top of the retailer&#39;s standard Renewable Energy Buyback Scheme (REBS) rate. Paired with the federal upfront multiplier under the Small-scale Renewable Energy Scheme (&#34;Solar Credits&#34;), the 40c tariff made small 1.5 kW to 2 kW systems pay for themselves in just a few years.&#xA;&#xA;Uptake was so rapid that the scheme approached its program budget far ahead of schedule:&#xA;&#xA;1 July 2010: Feed-in Scheme opens at 40c/kWh (plus REBS) for 10 years.&#xA;1 July 2011: Rate reduced to 20c/kWh (plus REBS) for new applications.&#xA;1 August 2011: Scheme suspended and closed to new applications after reaching its 150 MW capacity cap (roughly 75,000 household systems across WA).&#xA;2020–2021: All 10-year Feed-in Scheme contracts reached the end of their 10-year term, transitioning those households back to the standard flat REBS buyback rate alone.&#xA;&#xA;The REBS Era: Flat-Rate Exports at 7.135c/kWh&#xA;&#xA;Once the 2010–2011 premium scheme closed, new solar households in the SWIS were paid solely under Synergy&#39;s Renewable Energy Buyback Scheme (REBS). Under REBS, every kilowatt-hour exported to the grid earned the same flat rate regardless of the time of day. While the REBS rate started slightly higher in the early 2010s (around 8.4c to 8.9c/kWh), it was adjusted down alongside wholesale generation costs and settled at 7.1350 cents per unit (7.135c/kWh), where it remains today for grandfathered participants.&#xA;&#xA;When reviewing local system designs and Western Power connection standards, the local Perth solar and battery installer Fusion Sun Solar publishes practical reference material for households across Greater Perth and the Peel region.&#xA;&#xA;| Period | Scheme | Export Buyback Rate (Synergy SWIS) | Key Eligibility Rule |&#xA;| --- | --- | --- | --- |&#xA;| 1 Jul 2010 – 30 Jun 2011 | State Feed-in Scheme + REBS | 40c/kWh + REBS (~47–48c/kWh total) | 10-year contract from application date; closed |&#xA;| 1 Jul 2011 – 1 Aug 2011 | State Feed-in Scheme + REBS | 20c/kWh + REBS (~27–28c/kWh total) | Closed at 150 MW cap on 1 August 2011 |&#xA;| Aug 2011 – 30 Aug 2020 | REBS (flat rate) | 7.1350c/kWh flat (all hours) | Grandfathered only if system &amp;amp; occupant unchanged |&#xA;| 31 Aug 2020 – 30 Jun 2024 | DEBS (early time-of-export) | 10c/kWh (3pm–9pm); 3c stepping to 2.25c off-peak | Replaced REBS for new/upgraded systems |&#xA;| 1 Jul 2024 – 2026+ | DEBS (current time-of-export) | 10c/kWh (3pm–9pm); 2c/kWh (9pm–3pm) | First 50 kWh exported/day; inverter up to 5 kW |&#xA;&#xA;Throughout the 2010s, retail electricity charges rose substantially as the WA Government reduced tariff subsidies, while the flat REBS export rate stayed near 7.135c/kWh. Using a kilowatt-hour of solar inside the home saved three to four times more than exporting it.&#xA;&#xA;The Shift to DEBS on 31 August 2020&#xA;&#xA;On 31 August 2020, the WA Government launched the Distributed Energy Buyback Scheme (DEBS), replacing REBS for all new solar installations, system upgrades, battery additions, and properties where a new customer moved in on or after 6 November 2020.&#xA;&#xA;Unlike REBS, DEBS pays time-of-export rates that reflect the value of electricity on the SWIS at different times of the day:&#xA;&#xA;Peak export window (3:00 pm to 9:00 pm): 10.00 cents/kWh&#xA;Off-peak export window (before 3:00 pm and after 9:00 pm): Originally 3.00 cents/kWh at launch in August 2020, stepped down annually (2.75c in July 2021, 2.5c in July 2022, 2.25c in July 2023) to 2.00 cents/kWh from 1 July 2024, and confirmed unchanged at 2.00 cents/kWh for both 2025–26 and 2026–27.&#xA;Daily export cap: DEBS rates apply to the first 50 kWh (units) exported per day per premises.&#xA;System size eligibility: Available to residential, school and not-for-profit systems with a solar inverter capacity of 5 kW (5 kVA) or less (allowing up to 6.6 kW of solar panels). DEBS also permits exports from eligible home batteries and export-capable electric vehicle batteries, with no DEBS cap on battery storage capacity provided grid connection rules are met.&#xA;Temporary Export Credit: Customers moving into a solar home that still needs a Western Power meter upgrade or reconfiguration receive a Temporary Export Credit of 7.135c/kWh on a net basis until the compatible meter is active, after which DEBS rates apply.&#xA;&#xA;Existing REBS households were allowed to remain on their flat 7.135c/kWh rate only if they made no changes to their system. Replacing a smaller inverter with a larger one, adding panels, or installing a grid-connected battery triggers a transition to DEBS.&#xA;&#xA;Why Midday Exports Lost Value on the SWIS&#xA;&#xA;Western Australia&#39;s main grid—stretching from Kalbarri to Albany and east to Kalgoorlie—is completely isolated from the National Electricity Market in the eastern states. With more than one in three SWIS households running rooftop PV, sunny spring and summer middays flood the network with solar generation, pushing minimum operational demand down to record lows and driving midday wholesale prices negative.&#xA;&#xA;Homeowners comparing hardware specifications, inverter sizing, and current Western Australian installation options can also consult Perth battery rebates available before 2027 to benchmark typical setups against their own daily load profile.&#xA;&#xA;Paying a flat 7c+ subsidy for additional midday exports worsened the &#34;solar duck curve&#34; while doing nothing to help the evening peak between 3pm and 9pm when solar output drops and households turn on air conditioners, ovens and televisions. DEBS was designed alongside three complementary reforms:&#xA;&#xA;Time-of-export signals (10c vs 2c): Encouraging west-facing panel arrays that generate later into the afternoon and rewarding battery exports after 3pm.&#xA;Daytime load shifting: Encouraging households to run pool pumps, hot water heat pumps, dishwashers, washing machines and EV chargers between 9am and 3pm.&#xA;Emergency Solar Management (ESM): From 14 February 2022, new and upgraded systems up to 5 kW inverter capacity must support remote curtailment as a last-resort grid stability backstop during extreme low-load events.&#xA;&#xA;Regulated Synergy Electricity Tariffs in 2025 and 2026&#xA;&#xA;While daytime export credits dropped to 2c/kWh, the price of buying electricity from the grid continued to climb through annual regulated reviews (offset in 2022–2024 by one-off State and Federal household bill credits). From 1 July 2026, regulated Synergy residential tariffs increased by 2.75%.&#xA;&#xA;| Synergy Residential Tariff | Charge Component | 2025–26 Rate (inc. GST) | 2026–27 Rate from 1 Jul 2026 (inc. GST) |&#xA;| --- | --- | --- | --- |&#xA;| Home Plan (A1) (Flat rate) | Daily supply charge | 116.0505 c/day | 119.2419 c/day |&#xA;| Home Plan (A1) (Flat rate) | Anytime electricity usage | 32.3719 c/kWh | 33.2621 c/kWh |&#xA;| Midday Saver (Time-of-use) | Daily supply charge | 129.2269 c/day | 132.7806 c/day |&#xA;| Midday Saver (Time-of-use) | Super Off-Peak (9am – 3pm) | 8.6151 c/kWh | 8.8520 c/kWh |&#xA;| Midday Saver (Time-of-use) | Peak (3pm – 9pm) | 53.8446 c/kWh | 55.3253 c/kWh |&#xA;| Midday Saver (Time-of-use) | Off-Peak (9pm – 9am) | 23.6916 c/kWh | 24.3431 c/kWh |&#xA;| EV Add On (Time-of-use) | Overnight (11pm – 6am) | 19.3841 c/kWh | 19.9172 c/kWh |&#xA;| EV Add On (Time-of-use) | Super Off-Peak / Peak / Off-Peak | 8.6151c / 53.8446c / 23.6916c | 8.8520c / 55.3253c / 24.3431c |&#xA;&#xA;Look closely at the spread under the 2026–27 numbers:&#xA;&#xA;On the standard Home Plan (A1), every kilowatt-hour of solar you use directly inside your home avoids a 33.2621c/kWh grid purchase—more than 16 times the 2c/kWh you get for exporting that same kilowatt-hour before 3pm.&#xA;On Midday Saver, peak electricity between 3pm and 9pm costs 55.3253c/kWh. Storing midday solar (otherwise worth 2c/kWh exported) in a home battery to cover your 3pm–9pm evening load saves 53.3c per kilowatt-hour cycled.&#xA;&#xA;Battery Rebates in 2025 and 2026&#xA;&#xA;Because the gap between daytime exports (2c) and evening imports (33.26c to 55.33c) is now so wide, state and federal policy has pivoted to subsidising residential battery storage:&#xA;&#xA;WA Residential Battery Scheme: Provides a state rebate of $130 per kWh of usable capacity up to 10 kWh (up to $1,300) for Synergy customers—and $380 per kWh up to 10 kWh (up to $3,800) for Horizon Power customers—alongside means-tested no-interest loans of up to $10,000 (repayable over up to 10 years) for eligible low-to-moderate income households. Participating batteries must connect to an approved Virtual Power Plant (VPP) such as Synergy&#39;s Battery Rewards VPP.&#xA;Federal Cheaper Home Batteries Program: Launched on 1 July 2025 under the Small-scale Renewable Energy Scheme, cutting upfront battery costs by roughly 30% via STCs. From 1 May 2026, updated federal STC tapering rules apply a 100% STC factor to the first 14 kWh of usable capacity, 60% to capacity from 14 kWh to 28 kWh, and 15% from 28 kWh to 50 kWh, making 10 kWh to 14 kWh batteries the sweet spot for Perth households.&#xA;&#xA;The Federal Side: STCs from Solar Credits to 2030&#xA;&#xA;State feed-in tariffs sit alongside the federal Small-scale Renewable Energy Scheme (SRES). When you install an eligible system up to 100 kW, it generates Small-scale Technology Certificates (STCs) based on output zone (Perth is in Zone 3, receiving 1.382 STCs per kW per deeming year) and the number of years remaining until the scheme closes at the end of 2030.&#xA;&#xA;In 2009–2011, the federal &#34;Solar Credits&#34; multiplier multiplied the STCs on the first 1.5 kW of capacity by up to five times, before stepping down and ending completely by 2013. Since 2017, the deeming period has shortened by one year every 1 January—down to five deeming years in 2026 (and four in 2027). Even though each annual step-down trims the STC discount slightly, module manufacturing costs have fallen far faster, so a modern 6.6 kW system in Perth costs less out of pocket today than a 1.5 kW system did in 2010.&#xA;&#xA;How Typical Perth System Sizes Evolved&#xA;&#xA;| Era | Typical Perth System | Primary Economic Driver |&#xA;| --- | --- | --- |&#xA;| 2010 – 2011 | 1.5 kW – 2 kW | 40c/20c State Feed-in Scheme + 5x Federal Solar Credits multiplier |&#xA;| 2012 – 2016 | 3 kW – 5 kW | Rapidly falling panel prices + flat REBS buyback + rising A1 tariff |&#xA;| 2017 – 2021 | 6.6 kW on a 5 kW inverter | Daytime self-consumption + 133% panel oversizing rule on 5 kVA single-phase limit |&#xA;| 2022 – 2026 | 6.6 kW – 10 kW + 10–14 kWh battery | 2c midday DEBS rate, 33.26c A1 / 55.33c peak tariffs, WA &amp;amp; Federal battery rebates |&#xA;&#xA;Horizon Power Customers in Regional WA&#xA;&#xA;Outside the SWIS, Horizon Power operates 38 microgrids and regional networks across country WA. Under Energy Policy WA&#39;s DEBS schedule (from 1 July 2024), most Horizon Power towns receive 10c/kWh between 3pm and 9pm and 3c/kWh between 9pm and 3pm, though several towns use location-specific buyback rates and strict hosting capacity limits where local transformers cannot absorb more unscheduled solar. Because Horizon Power customers qualify for the higher $380/kWh (up to $3,800) state battery rebate, solar-plus-battery systems are especially attractive in regional WA.&#xA;&#xA;What This History Means for Perth Homeowners Today&#xA;&#xA;1. If You Still Hold a Grandfathered REBS Account (7.135c/kWh)&#xA;&#xA;If your older 3 kW to 5 kW system is working reliably and you export most of your midday power while away at work, your 7.135c/kWh flat REBS rate pays more than 3.5 times the 2c/kWh midday DEBS rate. However, once you factor in a 33.26c/kWh A1 usage rate and combined 2026 battery rebates, upgrading to a modern 6.6 kW to 10 kW solar-and-battery system often delivers far larger total bill savings than holding onto a small ageing system just to keep a 7.135c credit.&#xA;&#xA;2. If You Are Installing New Solar in 2026&#xA;&#xA;Design your array and appliance timers around self-consumption, not midday export volume. Consider north-west or east-west panel splits to widen generation into the morning and late afternoon, and put hot water, pool filtration and air-conditioning pre-cooling on timers between 9am and 3pm.&#xA;&#xA;3. If You Are Weighing a Home Battery&#xA;&#xA;With midday exports paying 2c/kWh and evening power costing 33.2621c/kWh on A1 (or 55.3253c/kWh on Midday Saver), every kilowatt-hour shifted from noon to 7pm saves 31c to 53c. Stacking the federal Cheaper Home Batteries discount with the WA Residential Battery Scheme dramatically shortens battery payback across Perth.&#xA;&#xA;Frequently Asked Questions&#xA;&#xA;What is the current solar feed-in tariff in Perth in 2026?&#xA;&#xA;Under Synergy&#39;s Distributed Energy Buyback Scheme (DEBS), unchanged from 1 July 2026, eligible households earn 10 cents/kWh for exports between 3:00 pm and 9:00 pm and 2 cents/kWh at all other times (9:00 pm to 3:00 pm), capped at the first 50 kWh exported per day.&#xA;&#xA;What is Synergy&#39;s Home Plan (A1) electricity rate in 2026?&#xA;&#xA;Effective 1 July 2026, Synergy&#39;s regulated Home Plan (A1) residential usage charge is 33.2621 cents per kWh (up from 32.3719 cents/kWh in 2025–26), with a daily supply charge of 119.2419 cents per day (inc. GST).&#xA;&#xA;Can I keep my 7.135c/kWh REBS rate if I add a battery or upgrade my inverter?&#xA;&#xA;No. Under REBS and DEBS terms, upgrading your solar PV capacity, increasing inverter capacity or adding a grid-connected battery requires a new distributed energy connection agreement and transitions the account from REBS (7.135c/kWh) to DEBS (10c/2c).&#xA;&#xA;When did the 40c/kWh WA feed-in tariff end?&#xA;&#xA;The 40c/kWh (and July 2011 20c/kWh) state Feed-in Scheme closed to new applicants on 1 August 2011 and paid participants for 10 years from their application date, meaning the final 10-year payments ended in 2021.&#xA;&#xA;Keeping Up With WA Tariff and Rebate Changes&#xA;&#xA;Final Thoughts&#xA;&#xA;Over sixteen years, Western Australia&#39;s solar policy evolved from a 40c/kWh export boom in 2010, through the 7.135c/kWh flat REBS decade, to today&#39;s 2c/10c DEBS structure, 33.26c/kWh A1 usage rates and combined federal-state battery rebates. The lesson is unmistakable: treat the grid as a backup rather than a buyer, run heavy loads during the sunny midday hours, and use battery storage to power your evening peak.&#xA;&#xA;For additional community notes, homeowner discussions, and shared field observations on Western Australian solar performance, see the Solar Energy Perth member profile on Doodle or Die.&#xA;]]&gt;</description>
      <content:encoded><![CDATA[<p>Ask a group of Perth solar owners what they get paid for exported rooftop power and you will hear very different answers. Long-time owners remember the generous 40-cent state feed-in tariff of 2010, mid-decade households still receive just over 7 cents on a grandfathered flat rate, and anyone installing or upgrading today earns 2 cents during the day and 10 cents in the late afternoon. Tracing the WA solar feed-in tariff history explains why the economics of rooftop solar in the South West Interconnected System (SWIS) have shifted decisively from grid exports to self-consumption, and why home battery storage now sits at the centre of household energy planning.</p>

<p>Every regulated rate below comes from official Energy Policy WA and Synergy tariff schedules current to 1 July 2026 (including GST). Because tariffs and scheme rules are reviewed annually, always confirm your meter configuration and eligibility with Synergy, Western Power or Horizon Power before altering an existing system.</p>

<h2 id="the-2010-2011-feed-in-scheme-40-cents-and-20-cents">The 2010–2011 Feed-In Scheme: 40 Cents and 20 Cents</h2>

<p>Western Australia&#39;s first major residential solar boom began on <strong>1 July 2010</strong>, when the State Government opened the residential <strong>Feed-in Scheme</strong> (often called the net feed-in tariff). Households that applied received a state-funded premium of <strong>40 cents per kilowatt-hour (c/kWh)</strong> for electricity exported to the grid for a fixed <strong>10-year period</strong> from the date of application, paid on top of the retailer&#39;s standard Renewable Energy Buyback Scheme (REBS) rate. Paired with the federal upfront multiplier under the Small-scale Renewable Energy Scheme (“Solar Credits”), the 40c tariff made small 1.5 kW to 2 kW systems pay for themselves in just a few years.</p>

<p>Uptake was so rapid that the scheme approached its program budget far ahead of schedule:</p>
<ul><li><strong>1 July 2010:</strong> Feed-in Scheme opens at <strong>40c/kWh</strong> (plus REBS) for 10 years.</li>
<li><strong>1 July 2011:</strong> Rate reduced to <strong>20c/kWh</strong> (plus REBS) for new applications.</li>
<li><strong>1 August 2011:</strong> Scheme suspended and closed to new applications after reaching its <strong>150 MW capacity cap</strong> (roughly 75,000 household systems across WA).</li>
<li><strong>2020–2021:</strong> All 10-year Feed-in Scheme contracts reached the end of their 10-year term, transitioning those households back to the standard flat REBS buyback rate alone.</li></ul>

<h2 id="the-rebs-era-flat-rate-exports-at-7-135c-kwh">The REBS Era: Flat-Rate Exports at 7.135c/kWh</h2>

<p>Once the 2010–2011 premium scheme closed, new solar households in the SWIS were paid solely under Synergy&#39;s <strong>Renewable Energy Buyback Scheme (REBS)</strong>. Under REBS, every kilowatt-hour exported to the grid earned the same flat rate regardless of the time of day. While the REBS rate started slightly higher in the early 2010s (around 8.4c to 8.9c/kWh), it was adjusted down alongside wholesale generation costs and settled at <strong>7.1350 cents per unit (7.135c/kWh)</strong>, where it remains today for grandfathered participants.</p>

<p>When reviewing local system designs and Western Power connection standards, the <a href="https://fusionsunsolar.com.au/" rel="nofollow">local Perth solar and battery installer Fusion Sun Solar</a> publishes practical reference material for households across Greater Perth and the Peel region.</p>

<table>
<thead>
<tr>
<th>Period</th>
<th>Scheme</th>
<th>Export Buyback Rate (Synergy SWIS)</th>
<th>Key Eligibility Rule</th>
</tr>
</thead>

<tbody>
<tr>
<td>1 Jul 2010 – 30 Jun 2011</td>
<td>State Feed-in Scheme + REBS</td>
<td>40c/kWh + REBS (~47–48c/kWh total)</td>
<td>10-year contract from application date; closed</td>
</tr>

<tr>
<td>1 Jul 2011 – 1 Aug 2011</td>
<td>State Feed-in Scheme + REBS</td>
<td>20c/kWh + REBS (~27–28c/kWh total)</td>
<td>Closed at 150 MW cap on 1 August 2011</td>
</tr>

<tr>
<td>Aug 2011 – 30 Aug 2020</td>
<td>REBS (flat rate)</td>
<td>7.1350c/kWh flat (all hours)</td>
<td>Grandfathered only if system &amp; occupant unchanged</td>
</tr>

<tr>
<td>31 Aug 2020 – 30 Jun 2024</td>
<td>DEBS (early time-of-export)</td>
<td>10c/kWh (3pm–9pm); 3c stepping to 2.25c off-peak</td>
<td>Replaced REBS for new/upgraded systems</td>
</tr>

<tr>
<td>1 Jul 2024 – 2026+</td>
<td>DEBS (current time-of-export)</td>
<td>10c/kWh (3pm–9pm); 2c/kWh (9pm–3pm)</td>
<td>First 50 kWh exported/day; inverter up to 5 kW</td>
</tr>
</tbody>
</table>

<p>Throughout the 2010s, retail electricity charges rose substantially as the WA Government reduced tariff subsidies, while the flat REBS export rate stayed near 7.135c/kWh. Using a kilowatt-hour of solar inside the home saved three to four times more than exporting it.</p>

<h2 id="the-shift-to-debs-on-31-august-2020">The Shift to DEBS on 31 August 2020</h2>

<p>On <strong>31 August 2020</strong>, the WA Government launched the <strong>Distributed Energy Buyback Scheme (DEBS)</strong>, replacing REBS for all new solar installations, system upgrades, battery additions, and properties where a new customer moved in on or after <strong>6 November 2020</strong>.</p>

<p>Unlike REBS, DEBS pays <strong>time-of-export rates</strong> that reflect the value of electricity on the SWIS at different times of the day:</p>
<ul><li><strong>Peak export window (3:00 pm to 9:00 pm):</strong> <strong>10.00 cents/kWh</strong></li>
<li><strong>Off-peak export window (before 3:00 pm and after 9:00 pm):</strong> Originally <strong>3.00 cents/kWh</strong> at launch in August 2020, stepped down annually (2.75c in July 2021, 2.5c in July 2022, 2.25c in July 2023) to <strong>2.00 cents/kWh</strong> from <strong>1 July 2024</strong>, and confirmed unchanged at <strong>2.00 cents/kWh</strong> for both 2025–26 and <strong>2026–27</strong>.</li>
<li><strong>Daily export cap:</strong> DEBS rates apply to the <strong>first 50 kWh (units) exported per day</strong> per premises.</li>
<li><strong>System size eligibility:</strong> Available to residential, school and not-for-profit systems with a solar inverter capacity of <strong>5 kW (5 kVA) or less</strong> (allowing up to <strong>6.6 kW of solar panels</strong>). DEBS also permits exports from eligible home batteries and export-capable electric vehicle batteries, with no DEBS cap on battery storage capacity provided grid connection rules are met.</li>
<li><strong>Temporary Export Credit:</strong> Customers moving into a solar home that still needs a Western Power meter upgrade or reconfiguration receive a Temporary Export Credit of <strong>7.135c/kWh</strong> on a net basis until the compatible meter is active, after which DEBS rates apply.</li></ul>

<p>Existing REBS households were allowed to remain on their flat <strong>7.135c/kWh</strong> rate only if they made no changes to their system. Replacing a smaller inverter with a larger one, adding panels, or installing a grid-connected battery triggers a transition to DEBS.</p>

<h2 id="why-midday-exports-lost-value-on-the-swis">Why Midday Exports Lost Value on the SWIS</h2>

<p>Western Australia&#39;s main grid—stretching from Kalbarri to Albany and east to Kalgoorlie—is completely isolated from the National Electricity Market in the eastern states. With more than one in three SWIS households running rooftop PV, sunny spring and summer middays flood the network with solar generation, pushing minimum operational demand down to record lows and driving midday wholesale prices negative.</p>

<p>Homeowners comparing hardware specifications, inverter sizing, and current Western Australian installation options can also consult <a href="https://fusionsunsolar.com.au/perth-battery-rebates-before-2027/" rel="nofollow">Perth battery rebates available before 2027</a> to benchmark typical setups against their own daily load profile.</p>

<p>Paying a flat 7c+ subsidy for additional midday exports worsened the “solar duck curve” while doing nothing to help the evening peak between 3pm and 9pm when solar output drops and households turn on air conditioners, ovens and televisions. DEBS was designed alongside three complementary reforms:</p>
<ul><li><strong>Time-of-export signals (10c vs 2c):</strong> Encouraging west-facing panel arrays that generate later into the afternoon and rewarding battery exports after 3pm.</li>
<li><strong>Daytime load shifting:</strong> Encouraging households to run pool pumps, hot water heat pumps, dishwashers, washing machines and EV chargers between 9am and 3pm.</li>
<li><strong>Emergency Solar Management (ESM):</strong> From 14 February 2022, new and upgraded systems up to 5 kW inverter capacity must support remote curtailment as a last-resort grid stability backstop during extreme low-load events.</li></ul>

<h2 id="regulated-synergy-electricity-tariffs-in-2025-and-2026">Regulated Synergy Electricity Tariffs in 2025 and 2026</h2>

<p>While daytime export credits dropped to 2c/kWh, the price of buying electricity from the grid continued to climb through annual regulated reviews (offset in 2022–2024 by one-off State and Federal household bill credits). From <strong>1 July 2026</strong>, regulated Synergy residential tariffs increased by <strong>2.75%</strong>.</p>

<table>
<thead>
<tr>
<th>Synergy Residential Tariff</th>
<th>Charge Component</th>
<th>2025–26 Rate (inc. GST)</th>
<th>2026–27 Rate from 1 Jul 2026 (inc. GST)</th>
</tr>
</thead>

<tbody>
<tr>
<td>Home Plan (A1) (Flat rate)</td>
<td>Daily supply charge</td>
<td>116.0505 c/day</td>
<td>119.2419 c/day</td>
</tr>

<tr>
<td>Home Plan (A1) (Flat rate)</td>
<td>Anytime electricity usage</td>
<td>32.3719 c/kWh</td>
<td>33.2621 c/kWh</td>
</tr>

<tr>
<td>Midday Saver (Time-of-use)</td>
<td>Daily supply charge</td>
<td>129.2269 c/day</td>
<td>132.7806 c/day</td>
</tr>

<tr>
<td>Midday Saver (Time-of-use)</td>
<td>Super Off-Peak (9am – 3pm)</td>
<td>8.6151 c/kWh</td>
<td>8.8520 c/kWh</td>
</tr>

<tr>
<td>Midday Saver (Time-of-use)</td>
<td>Peak (3pm – 9pm)</td>
<td>53.8446 c/kWh</td>
<td>55.3253 c/kWh</td>
</tr>

<tr>
<td>Midday Saver (Time-of-use)</td>
<td>Off-Peak (9pm – 9am)</td>
<td>23.6916 c/kWh</td>
<td>24.3431 c/kWh</td>
</tr>

<tr>
<td>EV Add On (Time-of-use)</td>
<td>Overnight (11pm – 6am)</td>
<td>19.3841 c/kWh</td>
<td>19.9172 c/kWh</td>
</tr>

<tr>
<td>EV Add On (Time-of-use)</td>
<td>Super Off-Peak / Peak / Off-Peak</td>
<td>8.6151c / 53.8446c / 23.6916c</td>
<td>8.8520c / 55.3253c / 24.3431c</td>
</tr>
</tbody>
</table>

<p>Look closely at the spread under the 2026–27 numbers:</p>
<ul><li>On the standard <strong>Home Plan (A1)</strong>, every kilowatt-hour of solar you use directly inside your home avoids a <strong>33.2621c/kWh</strong> grid purchase—more than <strong>16 times</strong> the <strong>2c/kWh</strong> you get for exporting that same kilowatt-hour before 3pm.</li>
<li>On <strong>Midday Saver</strong>, peak electricity between 3pm and 9pm costs <strong>55.3253c/kWh</strong>. Storing midday solar (otherwise worth 2c/kWh exported) in a home battery to cover your 3pm–9pm evening load saves <strong>53.3c per kilowatt-hour</strong> cycled.</li></ul>

<h2 id="battery-rebates-in-2025-and-2026">Battery Rebates in 2025 and 2026</h2>

<p>Because the gap between daytime exports (2c) and evening imports (33.26c to 55.33c) is now so wide, state and federal policy has pivoted to subsidising residential battery storage:</p>
<ul><li><strong>WA Residential Battery Scheme:</strong> Provides a state rebate of <strong>$130 per kWh of usable capacity up to 10 kWh (up to $1,300)</strong> for Synergy customers—and <strong>$380 per kWh up to 10 kWh (up to $3,800)</strong> for Horizon Power customers—alongside means-tested <strong>no-interest loans of up to $10,000</strong> (repayable over up to 10 years) for eligible low-to-moderate income households. Participating batteries must connect to an approved Virtual Power Plant (VPP) such as Synergy&#39;s Battery Rewards VPP.</li>
<li><strong>Federal Cheaper Home Batteries Program:</strong> Launched on <strong>1 July 2025</strong> under the Small-scale Renewable Energy Scheme, cutting upfront battery costs by roughly 30% via STCs. From <strong>1 May 2026</strong>, updated federal STC tapering rules apply a <strong>100% STC factor to the first 14 kWh</strong> of usable capacity, <strong>60% to capacity from 14 kWh to 28 kWh</strong>, and <strong>15% from 28 kWh to 50 kWh</strong>, making 10 kWh to 14 kWh batteries the sweet spot for Perth households.</li></ul>

<h2 id="the-federal-side-stcs-from-solar-credits-to-2030">The Federal Side: STCs from Solar Credits to 2030</h2>

<p>State feed-in tariffs sit alongside the federal <strong>Small-scale Renewable Energy Scheme (SRES)</strong>. When you install an eligible system up to 100 kW, it generates <strong>Small-scale Technology Certificates (STCs)</strong> based on output zone (Perth is in Zone 3, receiving 1.382 STCs per kW per deeming year) and the number of years remaining until the scheme closes at the end of <strong>2030</strong>.</p>

<p>In 2009–2011, the federal “Solar Credits” multiplier multiplied the STCs on the first 1.5 kW of capacity by up to five times, before stepping down and ending completely by 2013. Since 2017, the deeming period has shortened by one year every 1 January—down to <strong>five deeming years in 2026</strong> (and four in 2027). Even though each annual step-down trims the STC discount slightly, module manufacturing costs have fallen far faster, so a modern 6.6 kW system in Perth costs less out of pocket today than a 1.5 kW system did in 2010.</p>

<h2 id="how-typical-perth-system-sizes-evolved">How Typical Perth System Sizes Evolved</h2>

<table>
<thead>
<tr>
<th>Era</th>
<th>Typical Perth System</th>
<th>Primary Economic Driver</th>
</tr>
</thead>

<tbody>
<tr>
<td>2010 – 2011</td>
<td>1.5 kW – 2 kW</td>
<td>40c/20c State Feed-in Scheme + 5x Federal Solar Credits multiplier</td>
</tr>

<tr>
<td>2012 – 2016</td>
<td>3 kW – 5 kW</td>
<td>Rapidly falling panel prices + flat REBS buyback + rising A1 tariff</td>
</tr>

<tr>
<td>2017 – 2021</td>
<td>6.6 kW on a 5 kW inverter</td>
<td>Daytime self-consumption + 133% panel oversizing rule on 5 kVA single-phase limit</td>
</tr>

<tr>
<td>2022 – 2026</td>
<td>6.6 kW – 10 kW + 10–14 kWh battery</td>
<td>2c midday DEBS rate, 33.26c A1 / 55.33c peak tariffs, WA &amp; Federal battery rebates</td>
</tr>
</tbody>
</table>

<h2 id="horizon-power-customers-in-regional-wa">Horizon Power Customers in Regional WA</h2>

<p>Outside the SWIS, <strong>Horizon Power</strong> operates 38 microgrids and regional networks across country WA. Under Energy Policy WA&#39;s DEBS schedule (from 1 July 2024), most Horizon Power towns receive <strong>10c/kWh between 3pm and 9pm</strong> and <strong>3c/kWh between 9pm and 3pm</strong>, though several towns use location-specific buyback rates and strict <strong>hosting capacity limits</strong> where local transformers cannot absorb more unscheduled solar. Because Horizon Power customers qualify for the higher <strong>$380/kWh (up to $3,800)</strong> state battery rebate, solar-plus-battery systems are especially attractive in regional WA.</p>

<h2 id="what-this-history-means-for-perth-homeowners-today">What This History Means for Perth Homeowners Today</h2>

<h3 id="1-if-you-still-hold-a-grandfathered-rebs-account-7-135c-kwh">1. If You Still Hold a Grandfathered REBS Account (7.135c/kWh)</h3>

<p>If your older 3 kW to 5 kW system is working reliably and you export most of your midday power while away at work, your <strong>7.135c/kWh</strong> flat REBS rate pays more than 3.5 times the <strong>2c/kWh</strong> midday DEBS rate. However, once you factor in a 33.26c/kWh A1 usage rate and combined 2026 battery rebates, upgrading to a modern 6.6 kW to 10 kW solar-and-battery system often delivers far larger total bill savings than holding onto a small ageing system just to keep a 7.135c credit.</p>

<h3 id="2-if-you-are-installing-new-solar-in-2026">2. If You Are Installing New Solar in 2026</h3>

<p>Design your array and appliance timers around <strong>self-consumption</strong>, not midday export volume. Consider north-west or east-west panel splits to widen generation into the morning and late afternoon, and put hot water, pool filtration and air-conditioning pre-cooling on timers between 9am and 3pm.</p>

<h3 id="3-if-you-are-weighing-a-home-battery">3. If You Are Weighing a Home Battery</h3>

<p>With midday exports paying <strong>2c/kWh</strong> and evening power costing <strong>33.2621c/kWh on A1</strong> (or <strong>55.3253c/kWh on Midday Saver</strong>), every kilowatt-hour shifted from noon to 7pm saves 31c to 53c. Stacking the federal Cheaper Home Batteries discount with the WA Residential Battery Scheme dramatically shortens battery payback across Perth.</p>

<h2 id="frequently-asked-questions">Frequently Asked Questions</h2>

<h3 id="what-is-the-current-solar-feed-in-tariff-in-perth-in-2026">What is the current solar feed-in tariff in Perth in 2026?</h3>

<p>Under Synergy&#39;s Distributed Energy Buyback Scheme (DEBS), unchanged from 1 July 2026, eligible households earn <strong>10 cents/kWh</strong> for exports between <strong>3:00 pm and 9:00 pm</strong> and <strong>2 cents/kWh</strong> at all other times (9:00 pm to 3:00 pm), capped at the first 50 kWh exported per day.</p>

<h3 id="what-is-synergy-s-home-plan-a1-electricity-rate-in-2026">What is Synergy&#39;s Home Plan (A1) electricity rate in 2026?</h3>

<p>Effective <strong>1 July 2026</strong>, Synergy&#39;s regulated Home Plan (A1) residential usage charge is <strong>33.2621 cents per kWh</strong> (up from 32.3719 cents/kWh in 2025–26), with a daily supply charge of <strong>119.2419 cents per day</strong> (inc. GST).</p>

<h3 id="can-i-keep-my-7-135c-kwh-rebs-rate-if-i-add-a-battery-or-upgrade-my-inverter">Can I keep my 7.135c/kWh REBS rate if I add a battery or upgrade my inverter?</h3>

<p>No. Under REBS and DEBS terms, upgrading your solar PV capacity, increasing inverter capacity or adding a grid-connected battery requires a new distributed energy connection agreement and transitions the account from REBS (7.135c/kWh) to DEBS (10c/2c).</p>

<h3 id="when-did-the-40c-kwh-wa-feed-in-tariff-end">When did the 40c/kWh WA feed-in tariff end?</h3>

<p>The 40c/kWh (and July 2011 20c/kWh) state Feed-in Scheme closed to new applicants on <strong>1 August 2011</strong> and paid participants for 10 years from their application date, meaning the final 10-year payments ended in <strong>2021</strong>.</p>

<h2 id="keeping-up-with-wa-tariff-and-rebate-changes">Keeping Up With WA Tariff and Rebate Changes</h2>

<h2 id="final-thoughts">Final Thoughts</h2>

<p>Over sixteen years, Western Australia&#39;s solar policy evolved from a 40c/kWh export boom in 2010, through the 7.135c/kWh flat REBS decade, to today&#39;s 2c/10c DEBS structure, 33.26c/kWh A1 usage rates and combined federal-state battery rebates. The lesson is unmistakable: treat the grid as a backup rather than a buyer, run heavy loads during the sunny midday hours, and use battery storage to power your evening peak.</p>

<p>For additional community notes, homeowner discussions, and shared field observations on Western Australian solar performance, see <a href="https://doodleordie.com/profile/solarenergyperth" rel="nofollow">the Solar Energy Perth member profile on Doodle or Die</a>.</p>
]]></content:encoded>
      <guid>https://rant.li/solarpanelsperth/how-wa-solar-tariffs-changed-feed-in-and-electricity-prices-explained</guid>
      <pubDate>Sat, 24 Oct 2026 02:40:12 +0000</pubDate>
    </item>
  </channel>
</rss>